{"title":"ADC and DAC Conversion","description":"","products":[{"product_id":"pcf8591-module-analog-to-digital-digital-analog-converter-module-with-f-f-jumper-wire-1","title":"PCF8591 Module Analog to Digital \/ Digital-Analog Converter Module with F-F Jumper Wire","description":"\u003cdiv class=\"product_info\"\u003e\n\u003ch2 class=\"sing--sub-heading\"\u003e\u003cspan style=\"font-size: 18.72px;\"\u003ePCF8591 Module Analog to Digital \/ Digital-Analog Converter Module with F-F Jumper Wire \u003c\/span\u003e\u003c\/h2\u003e\nThis is a breakout board\/Prototype Board for PCF8591 IC. The PCF8591 is a single-chip, single‑supply low‑power 8‑bit CMOS data acquisition device with four analog inputs, one analog output, and a serial I²C‑bus interface. Three address pins A0, A1, and A2 are used for programming the hardware address, allowing the use of up to eight devices connected to the I²C‑bus without additional hardware. Address, control, and data to and from the device are transferred serially via the two-line bidirectional I²C‑bus.\u003cbr\u003e\u003cbr\u003eThe functions of the device include analog input multiplexing, on-chip track and hold function, 8-bit analog‑to‑digital conversion, and an 8‑bit digital‑to‑analog conversion. The maximum conversion rate is given by the maximum speed of the I²C-bus.\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003eTechnical Details\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003eOperating Voltage (VDC): 2.5 to 6\u003c\/li\u003e\n\u003cli\u003eIC Chip: PCF8951\u003c\/li\u003e\n\u003cli\u003ePCB Size (L x W) mm: 35 x 23\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003ePCF8591 IC Features\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003eThe Left\u003c\/li\u003e\n\u003cli\u003eSingle power supply\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 2.5V-6V\u003c\/li\u003e\n\u003cli\u003eLow standby current\u003c\/li\u003e\n\u003cli\u003eSerial input\/output via I2C bus\u003c\/li\u003e\n\u003cli\u003e3 hardware address pins\u003c\/li\u003e\n\u003cli\u003eSampling rate determined by I2C bus speed\u003c\/li\u003e\n\u003cli\u003e4 analog inputs: single-ended or differential\u003c\/li\u003e\n\u003cli\u003eAutomatic incremental channel selection\u003c\/li\u003e\n\u003cli\u003eAnalog voltage range: VSS to VDD\u003c\/li\u003e\n\u003cli\u003eBuilt-in track-and-hold circuit\u003c\/li\u003e\n\u003cli\u003e8-bit successive approximation A\/D converter\u003c\/li\u003e\n\u003cli\u003e1 analog output with DAC gain\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003eModule Features\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003eSupports external 4-way voltage input (0-5V range)\u003c\/li\u003e\n\u003cli\u003eIntegrated photoresistor for ambient light intensity measurement\u003c\/li\u003e\n\u003cli\u003eIntegrated thermistor for precise ambient temperature measurement\u003c\/li\u003e\n\u003cli\u003e1 channel 0-5V voltage input with adjustable potentiometer\u003c\/li\u003e\n\u003cli\u003ePower indicator for module status\u003c\/li\u003e\n\u003cli\u003eDA output indicator lights up based on output voltage\u003c\/li\u003e\n\u003cli\u003ePCB size: 3.6cm × 2.3cm\u003c\/li\u003e\n\u003cli\u003e1.6mm thick double-layer PCB with 3mm mounting holes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003eLeft Pin\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003eAOUT: Chip DA output interface\u003c\/li\u003e\n\u003cli\u003eAIN0: Chip analog input interface 0\u003c\/li\u003e\n\u003cli\u003eAIN1: Chip analog input interface 1\u003c\/li\u003e\n\u003cli\u003eAIN2: Chip analog input interface 2\u003c\/li\u003e\n\u003cli\u003eAIN3: Chip analog input interface 3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003eRight Pin Pin\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003eSCL – I2C clock interface (connect to microcontroller IO port)\u003c\/li\u003e\n\u003cli\u003eSDA – I2C data interface (connect to microcontroller IO port)\u003c\/li\u003e\n\u003cli\u003eGND – Connect to ground\u003c\/li\u003e\n\u003cli\u003eVCC – Connect to 3.3V-5V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003eFour red jumper-cap instruction\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003eP4 – Connect to P4 shorting cap to select thermistor access circuit\u003c\/li\u003e\n\u003cli\u003eP5 – Connect to P5 shorting cap to select photoresistor access circuit\u003c\/li\u003e\n\u003cli\u003eP6 – Connect to P6 shorting cap to select 0-5V adjustable voltage access circuit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch2 class=\"sing--sub-heading\"\u003e\u003cspan style=\"font-size: 18.72px;\"\u003eApplications :\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensor Data Collection\u003c\/strong\u003e: Reads analog signals from sensors like temperature sensors, light sensors, and pressure sensors, converting them into digital signals for microcontroller processing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal Conversion\u003c\/strong\u003e: Converts digital signals back into analog signals for use in devices like actuators, motors, or other analog-controlled systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomation Systems\u003c\/strong\u003e: Used in industrial automation to interface analog input devices with microcontrollers via I2C communication.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eData Acquisition Systems\u003c\/strong\u003e: Helps in acquiring and digitizing multiple analog signals in embedded system applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003ePhysical Attributes\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003eLxW (mm): 35x23mm\u003c\/li\u003e\n\u003cli\u003eWeight (gm) : 5\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003ePackage Includes\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds ls-n\"\u003e\n\u003cli\u003e1 x PCF8591 Module Analog to Digital \/ Digital-Analog Converter Module Jumper Wire \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"KitsGuru","offers":[{"title":"Default Title","offer_id":40708901699765,"sku":"KG191","price":142.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0587\/2130\/4757\/files\/PCF8591ModuleAnalogtoDigitalDigital-AnalogConverterModulewithF-FJumperWire_1.jpg?v=1738052750"},{"product_id":"pcf8591-ad-da-converter-module-analog-to-digital-conversion-4pin-f-f-cab-large-board","title":"PCF8591 Module Analog to Digital \/ Digital-Analog Converter Module Jumper Wire","description":"\u003cdiv class=\"product_info\"\u003e\n\u003ch2 class=\"sing--sub-heading\"\u003e\u003cspan style=\"font-size: 18.72px;\"\u003ePCF8591 Module Analog to Digital \/ Digital-Analog Converter Module Jumper Wire \u003c\/span\u003e\u003c\/h2\u003e\nThis is a breakout board\/Prototype Board for PCF8591 IC. The PCF8591 is a single-chip, single‑supply low‑power 8‑bit CMOS data acquisition device with four analog inputs, one analog output, and a serial I²C‑bus interface. Three address pins A0, A1, and A2 are used for programming the hardware address, allowing the use of up to eight devices connected to the I²C‑bus without additional hardware. Address, control, and data to and from the device are transferred serially via the two-line bidirectional I²C‑bus.\u003cbr\u003e\u003cbr\u003eThe functions of the device include analog input multiplexing, on-chip track and hold function, 8-bit analog‑to‑digital conversion, and an 8‑bit digital‑to‑analog conversion. The maximum conversion rate is given by the maximum speed of the I²C-bus.\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003eTechnical Details\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003eOperating Voltage (VDC): 2.5 to 6\u003c\/li\u003e\n\u003cli\u003eIC Chip: PCF8951\u003c\/li\u003e\n\u003cli\u003ePCB Size (L x W) mm: 35 x 23\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003ePCF8591 IC Features\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003eThe Left\u003c\/li\u003e\n\u003cli\u003eSingle power supply\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 2.5V-6V\u003c\/li\u003e\n\u003cli\u003eLow standby current\u003c\/li\u003e\n\u003cli\u003eSerial input\/output via I2C bus\u003c\/li\u003e\n\u003cli\u003e3 hardware address pins\u003c\/li\u003e\n\u003cli\u003eSampling rate determined by I2C bus speed\u003c\/li\u003e\n\u003cli\u003e4 analog inputs: single-ended or differential\u003c\/li\u003e\n\u003cli\u003eAutomatic incremental channel selection\u003c\/li\u003e\n\u003cli\u003eAnalog voltage range: VSS to VDD\u003c\/li\u003e\n\u003cli\u003eBuilt-in track-and-hold circuit\u003c\/li\u003e\n\u003cli\u003e8-bit successive approximation A\/D converter\u003c\/li\u003e\n\u003cli\u003e1 analog output with DAC gain\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003eModule Features\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003eSupports external 4-way voltage input (0-5V range)\u003c\/li\u003e\n\u003cli\u003eIntegrated photoresistor for ambient light intensity measurement\u003c\/li\u003e\n\u003cli\u003eIntegrated thermistor for precise ambient temperature measurement\u003c\/li\u003e\n\u003cli\u003e1 channel 0-5V voltage input with adjustable potentiometer\u003c\/li\u003e\n\u003cli\u003ePower indicator for module status\u003c\/li\u003e\n\u003cli\u003eDA output indicator lights up based on output voltage\u003c\/li\u003e\n\u003cli\u003ePCB size: 3.6cm × 2.3cm\u003c\/li\u003e\n\u003cli\u003e1.6mm thick double-layer PCB with 3mm mounting holes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003eLeft Pin\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003eAOUT: Chip DA output interface\u003c\/li\u003e\n\u003cli\u003eAIN0: Chip analog input interface 0\u003c\/li\u003e\n\u003cli\u003eAIN1: Chip analog input interface 1\u003c\/li\u003e\n\u003cli\u003eAIN2: Chip analog input interface 2\u003c\/li\u003e\n\u003cli\u003eAIN3: Chip analog input interface 3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003eRight Pin Pin\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003eSCL – I2C clock interface (connect to microcontroller IO port)\u003c\/li\u003e\n\u003cli\u003eSDA – I2C data interface (connect to microcontroller IO port)\u003c\/li\u003e\n\u003cli\u003eGND – Connect to ground\u003c\/li\u003e\n\u003cli\u003eVCC – Connect to 3.3V-5V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003eFour red jumper-cap instruction\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003eP4 – Connect to P4 shorting cap to select thermistor access circuit\u003c\/li\u003e\n\u003cli\u003eP5 – Connect to P5 shorting cap to select photoresistor access circuit\u003c\/li\u003e\n\u003cli\u003eP6 – Connect to P6 shorting cap to select 0-5V adjustable voltage access circuit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch2 class=\"sing--sub-heading\"\u003e\u003cspan style=\"font-size: 18.72px;\"\u003eApplications :\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensor Data Collection\u003c\/strong\u003e: Reads analog signals from sensors like temperature sensors, light sensors, and pressure sensors, converting them into digital signals for microcontroller processing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal Conversion\u003c\/strong\u003e: Converts digital signals back into analog signals for use in devices like actuators, motors, or other analog-controlled systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomation Systems\u003c\/strong\u003e: Used in industrial automation to interface analog input devices with microcontrollers via I2C communication.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eData Acquisition Systems\u003c\/strong\u003e: Helps in acquiring and digitizing multiple analog signals in embedded system applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003ePhysical Attributes\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003eLxW (mm): 35x23mm\u003c\/li\u003e\n\u003cli\u003eWeight (gm) : 5\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003ePackage Includes\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds ls-n\"\u003e\n\u003cli\u003e1 x PCF8591 Module Analog to Digital \/ Digital-Analog Converter Module Jumper Wire \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"KitsGuru","offers":[{"title":"Default Title","offer_id":44209970184444,"sku":"KG191V01","price":139.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0587\/2130\/4757\/products\/pcf8591-ad-da-converter-module-analog-to-digital-conversion-4pin-f-f-cab-large-board-2.jpg?v=1737977588"},{"product_id":"ads1115-16-bit-adc-4-channel-with-programmable-gain-amplifier-module","title":"ADS1115 16-Bit ADC 4 Channel Analog to Digital converter with Programmable Gain Amplifier (Standard Version)","description":"\u003cdiv class=\"product_info\"\u003e\n\u003ch2 class=\"sing--sub-heading\"\u003e\u003cspan style=\"font-size: 18.72px;\"\u003eADS1115 16-Bit ADC 4 Channel Analog to Digital converter with Programmable Gain Amplifier (Standard Version)\u003c\/span\u003e\u003c\/h2\u003e\nADS1115 16-Bit ADC – 4 Channel with Programmable Gain Amplifier is mostly used for microcontrollers project that needs an analog-to-digital converter or when you want a higher-precision ADC. ADS1115 16-Bit ADC- provides 16-bit precision at 860 samples\/second over I2C. The chip can be configured as 4 single-end input channels or two differential channels.\u003cbr\u003e\u003cbr\u003eAdditionally, ADC also includes a programmable gain amplifier, up to x16, to help boost up smaller single\/differential signals to the full range. We like this ADC because it can run from 2V to 5V power\/logic, can measure a large range of signals and it’s super easy to use. It is a great general-purpose 16-bit converter.\u003cbr\u003e\u003cbr\u003eThe ADS1115 chip is fairly small so it comes on a breakout board with ferrites to keep the AVDD and AGND quiet. Interfacing is done via I2C. The address can be changed to one of four options (see the datasheet table 5) so you can have up to 4 ADS1115s connect on a single 2-wire I2C bus for 16 single- end inputs.\u003cbr\u003e\u003cbr\u003eTo get you started we have example code for both the Raspberry Pi (in our \u003cstrong\u003eAdafruit Pi Python library\u003c\/strong\u003e) and Arduino (\u003cstrong\u003ein our ADS1X15 Arduino library repository\u003c\/strong\u003e) Simply connect GND to ground, VDD to your logic power supply, and SCL\/SDA to your microcontroller’s I2C port and run the example code to start reading data.\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003ePin Description of ADS1115\u003c\/h3\u003e\n\u003cdiv style=\"text-align: center;\" id=\"p_info\"\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/2130\/4757\/files\/Arduino-ADS1115-Module-Pin-Outs-Type-1.webp?v=1682012077\" alt=\"ADS1115 16-Bit ADC- 4 Channel with Programmable Gain Amplifier Module\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003eTechnical Details\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003eOperating Voltage: 2V - 5.5V\u003c\/li\u003e\n\u003cli\u003eModel No.: ADS1115\u003c\/li\u003e\n\u003cli\u003ePCB Size: 28 x 16 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 3g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003eFeatures\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003eWide Supply Range: 2.0V to 5.5V\u003c\/li\u003e\n\u003cli\u003eProgrammable Data Rate: 8SPS to 860SPS\u003c\/li\u003e\n\u003cli\u003eInternal low-drift voltage reference\u003c\/li\u003e\n\u003cli\u003eBuilt-in oscillator \u0026amp; PGA\u003c\/li\u003e\n\u003cli\u003eI2C Interface with pin-selectable addresses\u003c\/li\u003e\n\u003cli\u003eFour single-ended or two differential inputs\u003c\/li\u003e\n\u003cli\u003eProgrammable comparator\u003c\/li\u003e\n\u003cli\u003eI2C 7-bit address: 0x48-0x4B (jumper selectable)\u003c\/li\u003e\n\u003cli\u003eLow Power Consumption: 150µA (Continuous), Auto Shut-Down (Single-Shot)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch2 class=\"sing--sub-heading\"\u003e\u003cspan style=\"font-size: 18.72px;\"\u003eApplications :\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensor Interfacing:\u003c\/strong\u003e Reads analog signals from temperature, pressure, and light sensors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial Automation:\u003c\/strong\u003e Monitors and converts analog data for precision control systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eData Acquisition:\u003c\/strong\u003e Captures high-resolution analog signals for scientific applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIoT Projects:\u003c\/strong\u003e Enables accurate analog readings in smart devices\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio Signal Processing:\u003c\/strong\u003e Converts analog audio signals for digital applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003ePhysical Attributes\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003ePCB Size ( L x W ) mm :28 x 17.3\u003c\/li\u003e\n\u003cli\u003eWeight (gm): 3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003ePackage Includes\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003e1 x ADS1115 16-Bit ADC 4 Channel Analog to Digital converter with Programmable Gain Amplifier (Standard Version)\u003c\/li\u003e\n  \u003cli\u003e1 x 10-Pin Male Header\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"KitsGuru","offers":[{"title":"Default Title","offer_id":44343879926012,"sku":"KG922","price":119.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0587\/2130\/4757\/files\/ADS1115_16-Bit_ADC_4_Channel_Analog_to_Digital_converter_with_Programmable_Gain_Amplifier_Original_IC_-1_1.jpg?v=1740643517"},{"product_id":"25ga370-dc-6v-620rpm-reduction-motor-low-speed-high-torque-copy","title":"CJMCU MCP4725 I2C DAC Breakout Development Board","description":"\u003cdiv class=\"product_info\"\u003e\n\u003ch2 class=\"sing--sub-heading\"\u003e\u003cspan style=\"font-size: 18.72px;\"\u003eCJMCU MCP4725 I2C DAC Breakout Development Board\u003c\/span\u003e\u003c\/h2\u003e\n\u003cstrong\u003eWith CJMCU MCP4725 I2C DAC Breakout Development Board Module has MCP4725 which is an I2C controlled Digital-to-Analog converter (DAC). A very cost-efficient option of DAC allows you to send an analog signal, such as a sine wave, from a digital source, such as the I2C interface on the Arduino microcontroller.\u003c\/strong\u003e Digital to analog converters are great for sound generation, musical instruments, and many other creative projects!\u003cbr\u003e\u003cbr\u003eThis version of the MCP4725 Breakout came up with a few fixes for an issue with the board including the IC footprint, the I2C pinout, changes in the overall board dimensions to better fit your projects, and a few more minor tweaks than its previous versions. This board breaks out each pin you will need to access and use the MCP4725 including GND and Signal OUT pins for connecting to an oscilloscope or any other device you need to hook up to the board.\u003cbr\u003e\u003cbr\u003eAdditionally, the module has onboard SCL, SDA, VCC, and another GND for your basic I2C pinout. The pull-up resistors on this board can be disabled just check the Hookup Guide in the Documents section below for instructions and tips on doing this.\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003eSpecification\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds ls-n\"\u003e\n\u003cli\u003eOperating Voltage: 2.7V to 5.5V\u003c\/li\u003e\n\u003cli\u003eInterface Type: I2C\u003c\/li\u003e\n\u003cli\u003eResolution: 12-bit\u003c\/li\u003e\n\u003cli\u003eMounting Hole: M2.5\u003c\/li\u003e\n\u003cli\u003eDimensions(mm): 15.3 x 14.4x 1.4\u003c\/li\u003e\n\u003cli\u003eWeight: 1g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003eFeatures\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds ls-n\"\u003e\n\u003cli\u003e12-bit resolution\u003c\/li\u003e\n\u003cli\u003eI2C Interface (Standard, Fast, and High-Speed supported)\u003c\/li\u003e\n\u003cli\u003eSmall package\u003c\/li\u003e\n\u003cli\u003e2.7V to 5.5V supply\u003c\/li\u003e\n\u003cli\u003eInternal EEPROM to store settings\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 2.5mm\u003c\/li\u003e\n\u003cli\u003eDistance between mounting hole: 11.5mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch2 class=\"sing--sub-heading\"\u003e\u003cspan style=\"font-size: 18.72px;\"\u003eApplications :\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDigital-to-Analog signal conversion\u003c\/li\u003e\n\u003cli\u003eAudio signal processing\u003c\/li\u003e\n\u003cli\u003eWaveform generation for testing\u003c\/li\u003e\n\u003cli\u003eArduino and microcontroller projects\u003c\/li\u003e\n\u003cli\u003eIndustrial automation and control systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003ePhysical Attributes\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003eDimensions(mm): 15.3 x 14.4x 1.4\u003c\/li\u003e\n\u003cli\u003eWeight: 1 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003ePackage Includes\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds ls-n\"\u003e\n\u003cli\u003e1 x CJMCU MCP4725 I2C DAC Breakout Development Board\u003c\/li\u003e\n  \u003cli\u003e1 x 6 Pin male connector pcb mounted\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"KitsGuru","offers":[{"title":"Default Title","offer_id":46210986541308,"sku":"KG1167","price":177.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0587\/2130\/4757\/files\/CJMCUMCP4725I2CDACBreakoutDevelopmentBoard_1.jpg?v=1742377847"},{"product_id":"ads1115-16-bit-adc-4-channel-analog-to-digital-converter-with-programmable-gain-amplifier-standard-version","title":"ADS1115 16-Bit ADC 4 Channel Analog to Digital converter with Programmable Gain Amplifier (Original IC)","description":"\u003cdiv class=\"product_info\"\u003e\n\u003ch2 class=\"sing--sub-heading\"\u003e\u003cspan style=\"font-size: 18.72px;\"\u003eADS1115 16-Bit ADC 4 Channel Analog to Digital converter with Programmable Gain Amplifier (Original IC)\u003c\/span\u003e\u003c\/h2\u003e\nADS1115 16-Bit ADC – 4 Channel with Programmable Gain Amplifier is mostly used for microcontrollers project that needs an analog-to-digital converter or when you want a higher-precision ADC. ADS1115 16-Bit ADC- provides 16-bit precision at 860 samples\/second over I2C. The chip can be configured as 4 single-end input channels or two differential channels.\u003cbr\u003e\u003cbr\u003eAdditionally, ADC also includes a programmable gain amplifier, up to x16, to help boost up smaller single\/differential signals to the full range. We like this ADC because it can run from 2V to 5V power\/logic, can measure a large range of signals and it’s super easy to use. It is a great general-purpose 16-bit converter.\u003cbr\u003e\u003cbr\u003eThe ADS1115 chip is fairly small so it comes on a breakout board with ferrites to keep the AVDD and AGND quiet. Interfacing is done via I2C. The address can be changed to one of four options (see the datasheet table 5) so you can have up to 4 ADS1115s connect on a single 2-wire I2C bus for 16 single- end inputs.\u003cbr\u003e\u003cbr\u003eTo get you started we have example code for both the Raspberry Pi (in our \u003cstrong\u003eAdafruit Pi Python library\u003c\/strong\u003e) and Arduino (\u003cstrong\u003ein our ADS1X15 Arduino library repository\u003c\/strong\u003e) Simply connect GND to ground, VDD to your logic power supply, and SCL\/SDA to your microcontroller’s I2C port and run the example code to start reading data.\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003ePin Description of ADS1115\u003c\/h3\u003e\n\u003cdiv style=\"text-align: center;\" id=\"p_info\"\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/2130\/4757\/files\/Arduino-ADS1115-Module-Pin-Outs-Type-1.webp?v=1682012077\" alt=\"ADS1115 16-Bit ADC- 4 Channel with Programmable Gain Amplifier Module\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003eTechnical Details\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003eOperating Voltage: 2V - 5.5V\u003c\/li\u003e\n\u003cli\u003eModel No.: ADS1115\u003c\/li\u003e\n\u003cli\u003ePCB Size: 28 x 16 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 3g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003eFeatures\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003eWide Supply Range: 2.0V to 5.5V\u003c\/li\u003e\n\u003cli\u003eProgrammable Data Rate: 8SPS to 860SPS\u003c\/li\u003e\n\u003cli\u003eInternal low-drift voltage reference\u003c\/li\u003e\n\u003cli\u003eBuilt-in oscillator \u0026amp; PGA\u003c\/li\u003e\n\u003cli\u003eI2C Interface with pin-selectable addresses\u003c\/li\u003e\n\u003cli\u003eFour single-ended or two differential inputs\u003c\/li\u003e\n\u003cli\u003eProgrammable comparator\u003c\/li\u003e\n\u003cli\u003eI2C 7-bit address: 0x48-0x4B (jumper selectable)\u003c\/li\u003e\n\u003cli\u003eLow Power Consumption: 150µA (Continuous), Auto Shut-Down (Single-Shot)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch2 class=\"sing--sub-heading\"\u003e\u003cspan style=\"font-size: 18.72px;\"\u003eApplications :\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensor Interfacing:\u003c\/strong\u003e Reads analog signals from temperature, pressure, and light sensors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial Automation:\u003c\/strong\u003e Monitors and converts analog data for precision control systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eData Acquisition:\u003c\/strong\u003e Captures high-resolution analog signals for scientific applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIoT Projects:\u003c\/strong\u003e Enables accurate analog readings in smart devices\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio Signal Processing:\u003c\/strong\u003e Converts analog audio signals for digital applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003ePhysical Attributes\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003ePCB Size ( L x W ) mm :28 x 17.3\u003c\/li\u003e\n\u003cli\u003eWeight (gm): 4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003ePackage Includes\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003e1 x ADS1115 16-Bit ADC 4 Channel Analog to Digital converter with Programmable Gain Amplifier (Original IC)\u003c\/li\u003e\n\u003cli\u003e1 x 10-Pin Male Header\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"KitsGuru","offers":[{"title":"Default Title","offer_id":46918091440380,"sku":"KG921","price":199.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0587\/2130\/4757\/products\/ads1115-16-bit-adc-4-channel-with-programmable-gain-amplifier-module.jpg?v=1682012395"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0587\/2130\/4757\/collections\/ads1115-16-bit-adc-4-channel-with-programmable-gain-amplifier-module.jpg?v=1736583910","url":"https:\/\/kitsguru.com\/de\/collections\/analog-to-digital.oembed","provider":"KitsGuru","version":"1.0","type":"link"}