{"title":"Thermoelectric Peltier","description":"","products":[{"product_id":"tec1-12706-peltier-module","title":"TEC1 12706 12V 40x40mm Thermoelectric Cooler 6A Peltier Module","description":"\u003cdiv class=\"product_info\"\u003e\n\u003ch2 class=\"sing--sub-heading\"\u003e\u003cspan style=\"font-size: 18.72px;\"\u003eTEC1 12706 12V 40x40mm Thermoelectric Cooler 6A Peltier Module\u003c\/span\u003e\u003c\/h2\u003e\nThe \u003cstrong\u003epeltier module\u003c\/strong\u003e here is a compact solid-state cooler based on the thermoelectric effect, ideal for DIY and lab builds. As a versatile \u003cstrong\u003epeltier thermoelectric cooler\u003c\/strong\u003e, it creates a hot side and a cold side for rapid temperature control, while the identifier \u003cstrong\u003etec1 12706\u003c\/strong\u003e denotes the popular 40×40 mm, 6A class used widely in projects. Within its ceramic plates are 127 couples that push heat efficiently when powered, enabling dependable spot-cooling or heating. \u003cbr\u003e\u003cbr\u003eThis device leverages the same principles as any \u003cstrong\u003epeltier thermoelectric cooler\u003c\/strong\u003e: drive it from a DC source to move heat from one face to the other. One face warms and one cools, and you can reverse polarity to swap them. For safe, stable operation, always extract heat from the hot side using a suitable heatsink and airflow so the \u003cstrong\u003epeltier module\u003c\/strong\u003e maintains performance. \u003cbr\u003e\u003cbr\u003eWith appropriate thermal management, this \u003cstrong\u003epeltier module\u003c\/strong\u003e handles quick temperature shifts for CPUs, CCDs, mini-fridges, and instruments. When specifying parts, the label \u003cstrong\u003etec1 12706\u003c\/strong\u003e helps match drivers, power budgets, and mounting hardware; additionally, builders often pair this with a fan\/fin stack to maximize delta-T from a \u003cstrong\u003epeltier thermoelectric cooler\u003c\/strong\u003e. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOperating Tips:\u003c\/strong\u003e Do not exceed Imax or Vmax. Seal against moisture where needed. Life expectancy ~200,000 hours; long-term test failure rate ~0.2%. \u003cstrong\u003eImportant:\u003c\/strong\u003e never run without a heatsink—powering a \u003cstrong\u003epeltier module\u003c\/strong\u003e bare for more than a few seconds can cause rapid thermal runaway. For reference, many practical guides and driver examples call this model \u003cstrong\u003etec1 12706\u003c\/strong\u003e.\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003eTechnical Details – peltier thermoelectric cooler reference\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003eModel No.: TEC1 12706\u003c\/li\u003e\n\u003cli\u003eOperating Voltage (VDC): 12\u003c\/li\u003e\n\u003cli\u003eOperating Current (A): 6\u003c\/li\u003e\n\u003cli\u003eMax. Voltage (V): 15\u003c\/li\u003e\n\u003cli\u003eMax. Power (W): 54\u003c\/li\u003e\n\u003cli\u003eInternal Resistance (Ohm): 2.4 to 2.7\u003c\/li\u003e\n\u003cli\u003eWire Length (mm): 250\u003c\/li\u003e\n\u003cli\u003eLength (mm): 40\u003c\/li\u003e\n\u003cli\u003eWidth (mm): 40\u003c\/li\u003e\n\u003cli\u003eHeight (mm): 3.6\u003c\/li\u003e\n\u003cli\u003eWeight (g): 24\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003eFeatures\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003eSmall module.\u003c\/li\u003e\n\u003cli\u003eEasy transition between hot and cool sides by reversing polarity.\u003c\/li\u003e\n\u003cli\u003eQuality-tested cooling cells.\u003c\/li\u003e\n\u003cli\u003eSolid-state, vibration-free, and noise-free.\u003c\/li\u003e\n\u003cli\u003eSimple to install and operate.\u003c\/li\u003e\n\u003cli\u003eRequires use with a heat sink.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch2 class=\"sing--sub-heading\"\u003e\u003cspan style=\"font-size: 18.72px;\"\u003eApplications :\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCPU and Electronics Cooling:\u003c\/strong\u003e Used in computers, GPUs, or other electronic devices to dissipate heat efficiently.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThermal Management Systems:\u003c\/strong\u003e Ideal for applications requiring precise temperature control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefrigeration Systems:\u003c\/strong\u003e Incorporated in portable refrigerators, mini coolers, or wine chillers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLab Equipment:\u003c\/strong\u003e Used for temperature regulation in scientific instruments or experiments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Cooling Systems:\u003c\/strong\u003e Integrated into water cooling setups for enhanced performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003eIntegration with Arduino\u003c\/h3\u003e\n\u003cdiv id=\"p_info\" style=\"text-align: center;\"\u003e\u003cimg alt=\"peltier-module-arduino-integration\" height=\"75%\" width=\"95%\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/2130\/4757\/files\/TEC1-12706-with-Arduino.png?v=1638252165\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003eSample Code\u003c\/h3\u003e\n\u003cscript src=\"https:\/\/gist.github.com\/labsguru\/2b359f437e627b4c707be926dadcb800.js\"\u003e\u003c\/script\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003ePhysical Attributes\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003eLength (mm): 40\u003c\/li\u003e\n\u003cli\u003eWidth (mm): 40\u003c\/li\u003e\n\u003cli\u003eHeight (mm): 3.6\u003c\/li\u003e\n\u003cli\u003eWeight (g): 24\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003ePackage Includes\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds ls-n\"\u003e\n\u003cli\u003e1 x TEC1 12706 12V 40x40mm Thermoelectric Cooler 6A Peltier Module\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"KitsGuru","offers":[{"title":"Default Title","offer_id":42637614743804,"sku":"KG103","price":219.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0587\/2130\/4757\/files\/tec1-12706-peltier-module-top-view.jpg?v=1762406114"},{"product_id":"tec1-12712-thermoelectric-peltier","title":"TEC1-12712 40x40MM Thermoelectric Cooler 12A Peltier Module","description":"\u003cdiv class=\"product_info\"\u003e\n\u003ch2 class=\"sing--sub-heading\"\u003e\u003cspan style=\"font-size: 18.72px;\"\u003e\u003cstrong\u003ePeltier Module 12V\u003c\/strong\u003e TEC1-12712 40x40MM 12A Thermoelectric Cooler\u003c\/span\u003e\u003c\/h2\u003e\nThe TEC1-12712 40x40mm \u003cstrong\u003epeltier module 12v\u003c\/strong\u003e is a high-power \u003cstrong\u003ethermoelectric plate\u003c\/strong\u003e designed for strong cooling performance. It features 127 semiconductor couples and supports multiple \u003cstrong\u003etypes of peltier module\u003c\/strong\u003e applications — ranging from DIY cooling experiments to industrial heat-management systems. \u003cbr\u003e\u003cbr\u003eThis \u003cstrong\u003epeltier module 12v\u003c\/strong\u003e creates a fast temperature differential: one side becomes cold while the other becomes hot. You can reverse polarity for heating or cooling, and in some cases, use the temperature gradient to generate electricity. This flexibility makes it one of the most efficient \u003cstrong\u003etypes of peltier module\u003c\/strong\u003e in its power class. \u003cbr\u003e\u003cbr\u003eTo perform effectively, heat must be removed from the hot side using a heatsink. Without proper dissipation, the \u003cstrong\u003epeltier module 12v\u003c\/strong\u003e will quickly reach thermal equilibrium and stop cooling. A CPU heatsink works exceptionally well, as proven in testing where the cold side dropped so rapidly that it became uncomfortable to touch. \u003cbr\u003e\u003cbr\u003eAs a dependable \u003cstrong\u003ethermoelectric plate\u003c\/strong\u003e, it operates silently with no moving parts — ideal for CPUs, sensors, portable refrigerators, laser systems, and laboratory cooling builds. Offering powerful performance across many \u003cstrong\u003etypes of peltier module\u003c\/strong\u003e tasks, it remains a trusted choice for creators and engineers. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAlso known as:\u003c\/strong\u003e TEC modules, Peltier coolers, semiconductor cooling modules. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOperating Tips:\u003c\/strong\u003e Do not exceed rated voltage\/current; ensure moisture sealing when required. Life expectancy: ~200,000 hours Failure rate: ~0.2% \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e The hot side always requires a heatsink. Operating this \u003cstrong\u003epeltier module 12v\u003c\/strong\u003e without one — even briefly — may cause damage.\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003e\u003cspan style=\"font-size: 18.72px;\"\u003e Technical Details\u003c\/span\u003e\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003eModel No.: TEC1 12712\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 12V DC\u003c\/li\u003e\n\u003cli\u003eOperating Current: 10A\u003c\/li\u003e\n\u003cli\u003eItem Type: Thermoelectric Cooler\u003c\/li\u003e\n\u003cli\u003eMax. Voltage: 15V\u003c\/li\u003e\n\u003cli\u003eMax Power Output: 120W\u003c\/li\u003e\n\u003cli\u003ePower Cord Length: 25cm\u003c\/li\u003e\n\u003cli\u003eDimensions: 40mm x 40mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003eFeatures\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds ls-n\"\u003e\n\u003cli\u003eCompact, durable \u003cstrong\u003ethermoelectric plate\u003c\/strong\u003e construction.\u003c\/li\u003e\n\u003cli\u003eFast heating\/cooling based on polarity direction.\u003c\/li\u003e\n\u003cli\u003eQuality tested solid-state cooling cells.\u003c\/li\u003e\n\u003cli\u003eSilent operation — no vibration or noise.\u003c\/li\u003e\n\u003cli\u003eEasy to mount and wire.\u003c\/li\u003e\n\u003cli\u003eAlways use with a heatsink.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch2 class=\"sing--sub-heading\"\u003eApplications :\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectronic Cooling:\u003c\/strong\u003e CPUs, GPUs, and critical components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMini Refrigeration:\u003c\/strong\u003e DIY beverage coolers and mini-fridges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser \u0026amp; Optical:\u003c\/strong\u003e Stable temperature for sensors and laser diodes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedical \u0026amp; Lab:\u003c\/strong\u003e Portable temperature-controlled devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDIY \u0026amp; Experiments:\u003c\/strong\u003e Testing different \u003cstrong\u003etypes of peltier module\u003c\/strong\u003e designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial Temperature Control:\u003c\/strong\u003e Heat regulation in electronics and enclosures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003ePhysical Attributes\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003eDimensions: 40mm x 40mm\u003c\/li\u003e\n\u003cli\u003ePower Cord Length: 25cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003ePackage Includes\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds ls-n\"\u003e\n\u003cli\u003e1 x TEC1-12712 40x40mm \u003cstrong\u003epeltier module 12v\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"KitsGuru","offers":[{"title":"Default Title","offer_id":43675987017980,"sku":"KG810","price":469.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0587\/2130\/4757\/products\/tec1-12712-front-view.jpg?v=1765267552"},{"product_id":"tec1-12703-thermoelectric-peltier","title":"TEC1-12703 40x40mm Thermoelectric Cooler 3A Peltier Module","description":"\u003cdiv class=\"product_info\"\u003e\n\u003ch2 class=\"sing--sub-heading\"\u003e\u003cspan style=\"font-size: 18.72px;\"\u003e\u003cstrong\u003eThermoelectric Peltier Module\u003c\/strong\u003e TEC1-12703 40x40mm Cooler 3A\u003c\/span\u003e\u003c\/h2\u003e\nThe TEC1-12703 40x40mm \u003cstrong\u003ethermoelectric peltier module\u003c\/strong\u003e is a compact and high-efficiency \u003cstrong\u003ethermoelectric module\u003c\/strong\u003e that utilizes the advanced Peltier thermoelectric effect. With 127 semiconductor couples packed into a 30mm × 30mm area, this \u003cstrong\u003epeltier module 12703\u003c\/strong\u003e delivers excellent heating and cooling performance for electronic applications. \u003cbr\u003e\u003cbr\u003eThermoelectric coolers (TEC) — often called a \u003cstrong\u003ethermoelectric module\u003c\/strong\u003e — create a temperature difference, generating a hot side and a cold side. This allows the module to either cool or heat components depending on supply polarity. Additionally, you can even generate power using the temperature differential. \u003cbr\u003e\u003cbr\u003eThis \u003cstrong\u003ethermoelectric peltier module\u003c\/strong\u003e performs efficiently when the hot side is properly cooled. After the power is applied, the hot side heats up while the cold side cools rapidly. A heatsink is strongly recommended to avoid thermal saturation. Using a CPU heatsink and power supply can make the cold side drop so low that touching it becomes uncomfortable. \u003cbr\u003e\u003cbr\u003eA \u003cstrong\u003epeltier module 12703\u003c\/strong\u003e works as a small semiconductor-based heat pump. When powered using a 12V DC or regulated voltage up to 15V, it transfers heat from one side to the other. Such \u003cstrong\u003ethermoelectric module\u003c\/strong\u003e systems are widely used in CPU cooling, CCD stabilization, mini refrigerators, and temperature-controlled equipment. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAlso known as:\u003c\/strong\u003e Thermoelectric cooling modules, Peltier modules, TEC modules. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOperating Tips:\u003c\/strong\u003e Do not exceed the rated Imax and Vmax. Ensure proper moisture sealing in final applications. \u003cbr\u003eLife expectancy: 200,000 hours. \u003cbr\u003eFailure rate: approx. 0.2%. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant Note:\u003c\/strong\u003e The hot side MUST always have a heatsink. Running this \u003cstrong\u003ethermoelectric peltier module\u003c\/strong\u003e even for a few seconds without a heatsink may damage it.\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003eTechnical Details\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003eModel No. : TEC1 12703\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 12V DC\u003c\/li\u003e\n\u003cli\u003eOperating Current: 3A\u003c\/li\u003e\n\u003cli\u003eMax. Voltage: 15V\u003c\/li\u003e\n\u003cli\u003eMax. Power: 30W\u003c\/li\u003e\n\u003cli\u003eMax. Operating Temperature: 65°C\u003c\/li\u003e\n\u003cli\u003eWire Length: 195mm\u003c\/li\u003e\n\u003cli\u003eDimensions: 40 x 40 x 3.5 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 18g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003eFeatures\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds ls-n\"\u003e\n\u003cli\u003eCompact 40×40 mm module.\u003c\/li\u003e\n\u003cli\u003eCooling and heating by reversing supply polarity.\u003c\/li\u003e\n\u003cli\u003eQuality tested cooling cells.\u003c\/li\u003e\n\u003cli\u003eSolid-state operation — noise-free \u0026amp; vibration-free.\u003c\/li\u003e\n\u003cli\u003eEasy to install and operate.\u003c\/li\u003e\n\u003cli\u003eRequires a heatsink for proper function.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch2 class=\"sing--sub-heading\"\u003e\u003cspan style=\"font-size: 18.72px;\"\u003eApplications :\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectronics Cooling:\u003c\/strong\u003e CPUs, GPUs, sensors, and ICs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMini Refrigeration:\u003c\/strong\u003e Cold storage for beverages \u0026amp; compact coolers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDIY Projects:\u003c\/strong\u003e Experimental temperature-control builds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Equipment:\u003c\/strong\u003e Maintains stable temperature for optical systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003ePhysical Attributes\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003eWire Length: 195 mm\u003c\/li\u003e\n\u003cli\u003eDimensions: 40 × 40 × 3.5 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 18 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003ePackage Includes\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds ls-n\"\u003e\n\u003cli\u003e1 × TEC1-12703 40x40mm Thermoelectric Cooler 3A Peltier Module\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"KitsGuru","offers":[{"title":"Default Title","offer_id":43680970211580,"sku":"KG804","price":263.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0587\/2130\/4757\/products\/tec1-12703-peltier-module-front.jpg?v=1765258087"},{"product_id":"tec1-12704-thermoelectric-peltier","title":"TEC1-12704 40x40mm Thermoelectric Cooler 4A Peltier Module","description":"\u003cdiv class=\"product_info\"\u003e\n\u003ch2 class=\"sing--sub-heading\"\u003e\u003cspan style=\"font-size: 18.72px;\"\u003e\u003cstrong\u003ePeltier Cell Cooling\u003c\/strong\u003e Module TEC1-12704 40x40 mm 4A\u003c\/span\u003e\u003c\/h2\u003e\nThe TEC1-12704 40x40 mm \u003cstrong\u003epeltier cell cooling\u003c\/strong\u003e module is a compact, high-efficiency \u003cstrong\u003esmall peltier module\u003c\/strong\u003e that uses the Peltier thermoelectric effect for reliable cooling or heating. This \u003cstrong\u003ecooler module Kit\u003c\/strong\u003e features 127 semiconductor couples across the full 40mm × 40mm area, capable of effectively cooling and heating up to 70 °C. \u003cbr\u003e\u003cbr\u003eWith this \u003cstrong\u003epeltier cell cooling\u003c\/strong\u003e system, one side becomes hot while the other becomes cold — allowing you to either cool down or warm up components simply by supplying power. Additionally, if properly set up, the temperature differential can be used to generate electricity. \u003cbr\u003e\u003cbr\u003eThis Peltier module performs best when the hot side is actively cooled. Once powered, the hot side warms up quickly while the cold side becomes cold fast. Without a heatsink or similar heat-dissipating solution, the unit will soon reach equilibrium and lose effectiveness. For optimal results, we recommend using a CPU heatsink or a metal block to draw away heat. In our tests, a PSU plus CPU-heatsink setup made the cold side drop so low that touching it became uncomfortable. \u003cbr\u003e\u003cbr\u003eA \u003cstrong\u003esmall peltier module\u003c\/strong\u003e such as this acts as a compact semiconductor-based heat pump. When supplied with 12 V DC (or up to 15 V), the module transfers heat from one side to the other, creating a cold side and a hot side. Such \u003cstrong\u003ecooler module Kit\u003c\/strong\u003e units are widely used for electronics cooling, portable refrigerators, medical instruments, and compact thermal management applications. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAlso known as:\u003c\/strong\u003e Thermoelectric cooling modules, Peltier modules, TEC modules. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOperating Tips:\u003c\/strong\u003e Do not exceed rated Imax or Vmax. Ensure proper moisture protection (sealing) if used in final application. Life expectancy: approx. 200,000 hours. Failure rate: ~0.2%. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant Note:\u003c\/strong\u003e The hot side must always have a heatsink attached. Running this \u003cstrong\u003epeltier cell cooling\u003c\/strong\u003e module for even a few seconds without a heatsink may damage it.\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003eTechnical Details\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003eModel No.: TEC1 12704\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 12V DC\u003c\/li\u003e\n\u003cli\u003eOperating Current: 4A\u003c\/li\u003e\n\u003cli\u003eMax. Voltage: 15V\u003c\/li\u003e\n\u003cli\u003eMax. Power: 36W\u003c\/li\u003e\n\u003cli\u003eInternal Resistance: 3.0 to 3.3 Ω\u003c\/li\u003e\n\u003cli\u003eWire Length: 290mm\u003c\/li\u003e\n\u003cli\u003eDimensions: 40 × 40 × 3.5 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 24g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003eFeatures\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds ls-n\"\u003e\n\u003cli\u003eCompact 40×40 mm size — ideal as a \u003cstrong\u003esmall peltier module\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eSwitch between cold side and hot side by reversing polarity.\u003c\/li\u003e\n\u003cli\u003eQuality-tested semiconductor cooling cells.\u003c\/li\u003e\n\u003cli\u003eSolid-state — vibration-free and silent operation.\u003c\/li\u003e\n\u003cli\u003eSimple to install and operate.\u003c\/li\u003e\n\u003cli\u003eRequires a heatsink for proper operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch2 class=\"sing--sub-heading\"\u003e\u003cspan style=\"font-size: 18.72px;\"\u003eApplications :\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectronic Cooling:\u003c\/strong\u003e Suitable for cooling CPUs, GPUs, sensors and other heat-sensitive electronics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMini Refrigeration:\u003c\/strong\u003e Works well in compact refrigerators, beverage coolers, or portable cooling boxes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedical \u0026amp; Laboratory Cooling:\u003c\/strong\u003e Useful for portable medical cooling devices like vaccine storage units.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser \u0026amp; Optical Equipment:\u003c\/strong\u003e Helps maintain stable temperatures for laser diodes or optical sensors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDIY \u0026amp; Custom Projects:\u003c\/strong\u003e Great for experimental thermal management setups and custom cooling\/heating projects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial Temperature Control:\u003c\/strong\u003e Effective for maintaining stable temperatures in enclosures or machinery.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003ePhysical Attributes\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003eWire Length: 290 mm\u003c\/li\u003e\n\u003cli\u003eDimensions: 40 × 40 × 3.5 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 24 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003ePackage Includes\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds ls-n\"\u003e\n\u003cli\u003e1 × TEC1-12704 40x40 mm Peltier Cell Cooling module (4A, 12V)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"KitsGuru","offers":[{"title":"Default Title","offer_id":43680973816060,"sku":"KG805","price":239.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0587\/2130\/4757\/products\/tec1-12704-40x40mm-front.jpg?v=1765259083"},{"product_id":"tec1-12705-thermoelectric-peltier","title":"TEC1-12705 40x40mm Thermoelectric Cooler 5A Peltier Module","description":"\u003cdiv class=\"product_info\"\u003e\n\u003ch2 class=\"sing--sub-heading\"\u003e\u003cspan style=\"font-size: 18.72px;\"\u003e\u003cstrong\u003ePeltier Module Cooler\u003c\/strong\u003e TEC1-12705 40x40 mm 5A\u003c\/span\u003e\u003c\/h2\u003e\nThe TEC1-12705 40x40 mm \u003cstrong\u003epeltier module cooler\u003c\/strong\u003e is a compact yet powerful \u003cstrong\u003epeltier element\u003c\/strong\u003e optimized for efficient cooling or heating. This \u003cstrong\u003ethermoelectric cooler peltier 12v\u003c\/strong\u003e module uses 127 semiconductor couples across its full 40 mm × 40 mm area and can effectively cool or heat up to 80 °C. \u003cbr\u003e\u003cbr\u003eWhen powered, the module creates a temperature differential: one side becomes hot while the other turns cold. This enables you to cool or warm components simply by switching polarity. Moreover, under optimal conditions, you can even exploit the thermal difference to recover energy. \u003cbr\u003e\u003cbr\u003eTo ensure peak performance, the hot side must be actively cooled. Without a heatsink or similar heat-dissipating solution, the module will quickly reach equilibrium and lose effectiveness. Therefore, pairing this \u003cstrong\u003epeltier module cooler\u003c\/strong\u003e with a good CPU heatsink or metal block is highly recommended. In tests, a PSU with heatsink setup made the cold side so chilly that maintaining a finger on it became difficult. \u003cbr\u003e\u003cbr\u003eAs a quality \u003cstrong\u003epeltier element\u003c\/strong\u003e, this module functions as a solid-state heat pump. When supplied with 12 V DC (up to 15 V), the module transfers heat from one side to the other — forming a cold side and a hot side. Such \u003cstrong\u003ethermoelectric cooler peltier 12v\u003c\/strong\u003e modules are ideal for electronics cooling, portable refrigeration units, medical devices, and custom thermal control applications. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAlso known as:\u003c\/strong\u003e Thermoelectric cooling modules, TEC modules, Peltier plates, semiconductor coolers. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOperating Tips:\u003c\/strong\u003e Do not exceed the rated Imax or Vmax. Ensure moisture protection (sealing) when used in final applications. Life expectancy: approx. 200,000 hours. Failure rate (after long-term testing): approx. 0.2%. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant Note:\u003c\/strong\u003e The hot side MUST always have a heatsink. Running this \u003cstrong\u003epeltier module cooler\u003c\/strong\u003e even for a few seconds without a heatsink attached may damage the module.\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003eTechnical Details\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003eModel No.: TEC1 12705\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 12V DC\u003c\/li\u003e\n\u003cli\u003eOperating Current: 5.2A\u003c\/li\u003e\n\u003cli\u003eMax. Voltage: 15V\u003c\/li\u003e\n\u003cli\u003eMax. Power: 54W\u003c\/li\u003e\n\u003cli\u003eInternal Resistance: 2.4 to 2.7 Ω\u003c\/li\u003e\n\u003cli\u003eWire Length: 300 mm\u003c\/li\u003e\n\u003cli\u003eDimensions: 40 × 40 × 3.6 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 21 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003eFeatures\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds ls-n\"\u003e\n\u003cli\u003eCompact 40×40 mm design — ideal as a \u003cstrong\u003epeltier element\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eSwitch between hot and cold sides by reversing polarity.\u003c\/li\u003e\n\u003cli\u003eHigh-quality semiconductor cooling cells, tested for consistency.\u003c\/li\u003e\n\u003cli\u003eSolid-state operation — vibration-free and silent.\u003c\/li\u003e\n\u003cli\u003eSimple to install and operate.\u003c\/li\u003e\n\u003cli\u003eRequires a heatsink for stable operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch2 class=\"sing--sub-heading\"\u003e\u003cspan style=\"font-size: 18.72px;\"\u003eApplications :\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectronics Cooling:\u003c\/strong\u003e Ideal for cooling CPUs, GPUs, sensors, and other heat-sensitive components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMini Refrigeration Systems:\u003c\/strong\u003e Suitable for portable coolers, small refrigerators, and beverage chillers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedical \u0026amp; Lab Devices:\u003c\/strong\u003e Useful for temperature-controlled medical storage (e.g. vaccines, samples).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser \u0026amp; Optical Equipment:\u003c\/strong\u003e Maintains stable temperature for laser diodes and optical sensors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDIY Cooling Projects:\u003c\/strong\u003e Great for custom thermal management, experimental cooling setups, or hobbyist builds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial Temperature Control:\u003c\/strong\u003e Helpful for regulating temperatures in machinery enclosures and thermal systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003ePhysical Attributes\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003eDimensions: 40 × 40 × 3.6 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 21 g\u003c\/li\u003e\n\u003cli\u003eWire Length: 300 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003ePackage Includes\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds ls-n\"\u003e\n\u003cli\u003e1 × TEC1-12705 40x40 mm \u003cstrong\u003epeltier module cooler\u003c\/strong\u003e (5A, 12V)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"KitsGuru","offers":[{"title":"Default Title","offer_id":43680975683836,"sku":"KG806","price":249.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0587\/2130\/4757\/products\/tec1-12705-40x40mm-front.jpg?v=1765259859"},{"product_id":"tec1-12709-thermoelectric-peltier","title":"TEC1-12709 40x40mm Thermoelectric Cooler 9A Peltier Module","description":"\u003cdiv class=\"product_info\"\u003e\n\u003ch2 class=\"sing--sub-heading\"\u003e\u003cspan style=\"font-size: 18.72px;\"\u003e\u003cstrong\u003eThermoelectric Peltier Generator\u003c\/strong\u003e TEC1-12709 40x40mm 9A Module\u003c\/span\u003e\u003c\/h2\u003e\nThe TEC1-12709 40x40mm \u003cstrong\u003ethermoelectric peltier generator\u003c\/strong\u003e is a powerful and reliable \u003cstrong\u003etec module\u003c\/strong\u003e designed for efficient heat transfer. This \u003cstrong\u003ebest peltier module for cooling\u003c\/strong\u003e uses 127 semiconductor couples to create a strong temperature differential, making it ideal for electronics cooling or even generating electricity when exposed to heat differences. \u003cbr\u003e\u003cbr\u003eOne side becomes cold while the other gets hot, allowing it to warm or cool components simply by reversing polarity. Additionally, you can harness a temperature gradient for energy conversion, making this \u003cstrong\u003ethermoelectric peltier generator\u003c\/strong\u003e suitable for experimental power-generation projects. \u003cbr\u003e\u003cbr\u003eTo perform properly, the hot side must be cooled using a heatsink. If this step is skipped, the module will quickly reach thermal balance and lose effectiveness. We recommend a CPU heatsink or a solid metal heat spreader for optimal cooling. In testing, a computer-grade heatsink made the cold side so chilled that it became uncomfortable to touch. \u003cbr\u003e\u003cbr\u003eThis \u003cstrong\u003etec module\u003c\/strong\u003e is widely used in computer CPU cooling, compact refrigeration, laser stabilization systems, portable medical units, and custom industrial temperature-control builds. When powered by DC 12V, this \u003cstrong\u003ebest peltier module for cooling\u003c\/strong\u003e performs as a solid-state heat pump without vibration or audible noise. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAlso Known as:\u003c\/strong\u003e Peltier modules, semiconductor cooling plates, and thermoelectric cooling modules. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOperating Tips:\u003c\/strong\u003e Do not exceed rated Imax or Vmax. Apply moisture protection if needed.\u003cbr\u003eLife expectancy: approx. 200,000 hours\u003cbr\u003eFailure rate: approx. 0.2% \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant Note:\u003c\/strong\u003e The hot side MUST always have a heatsink attached. Running this \u003cstrong\u003ethermoelectric peltier generator\u003c\/strong\u003e without heat dissipation can cause rapid damage.\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003eTechnical Details\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003eModel No.: TEC1 12709\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 12V DC\u003c\/li\u003e\n\u003cli\u003eOperating Current: 9A\u003c\/li\u003e\n\u003cli\u003eMax. Voltage: 15V\u003c\/li\u003e\n\u003cli\u003eMax. Power: 130W\u003c\/li\u003e\n\u003cli\u003eWire Length: 370mm\u003c\/li\u003e\n\u003cli\u003eDimensions: 40 x 40 x 3.6 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 25g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003eFeatures\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds ls-n\"\u003e\n\u003cli\u003eCompact 40mm size – ideal \u003cstrong\u003etec module\u003c\/strong\u003e for limited space.\u003c\/li\u003e\n\u003cli\u003eSilent, solid-state heat transfer technology.\u003c\/li\u003e\n\u003cli\u003eHigh-quality semiconductor cooling cells.\u003c\/li\u003e\n\u003cli\u003eFast heating and cooling response.\u003c\/li\u003e\n\u003cli\u003eEasy to install and operate.\u003c\/li\u003e\n\u003cli\u003eRequires heatsink for optimal function.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch2 class=\"sing--sub-heading\"\u003e\u003cspan style=\"font-size: 18.72px;\"\u003eApplications :\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectronic Cooling:\u003c\/strong\u003e CPUs, GPUs, sensors, and power electronics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMini Refrigeration:\u003c\/strong\u003e Small coolers and portable fridges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser \u0026amp; Optical Stabilization:\u003c\/strong\u003e Maintaining critical temperature ranges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedical Equipment:\u003c\/strong\u003e Used in compact medical cooling devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDIY Projects:\u003c\/strong\u003e Ideal \u003cstrong\u003ebest peltier module for cooling\u003c\/strong\u003e experiments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial Temperature Regulation:\u003c\/strong\u003e Thermal management for enclosures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003ePhysical Attributes\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003eL x W x H (mm): 40 x 40 x 3.6\u003c\/li\u003e\n\u003cli\u003eWeight (gm): 25\u003c\/li\u003e\n\u003cli\u003eWire Length (mm): 3700\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003ePackage Includes\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds ls-n\"\u003e\n\u003cli\u003e1 x TEC1-12709 40x40mm Thermoelectric Peltier Generator 9A Module\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"KitsGuru","offers":[{"title":"Default Title","offer_id":43680978960636,"sku":"KG808","price":347.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0587\/2130\/4757\/products\/tec1-12709-front-view.jpg?v=1765262105"},{"product_id":"tec1-12710-thermoelectric-peltier","title":"TEC1-12710 40x40mm Thermoelectric Cooler 10A Peltier Module","description":"\u003cdiv class=\"product_info\"\u003e\n\u003ch2 class=\"sing--sub-heading\"\u003e\u003cspan style=\"font-size: 18.72px;\"\u003e\u003cstrong\u003eThermoelectric Peltier\u003c\/strong\u003e Cooler TEC1-12710 40x40 mm 10A\u003c\/span\u003e\u003c\/h2\u003e\nLooking to cool down your DIY project or electronic device? The TEC1-12710 40x40 mm \u003cstrong\u003ethermoelectric peltier\u003c\/strong\u003e module is a powerful and efficient \u003cstrong\u003epeltier element cooler\u003c\/strong\u003e designed for reliable thermal performance. It offers great value compared to typical \u003cstrong\u003ethermoelectric module price\u003c\/strong\u003e ranges, while still providing high-performance cooling. \u003cbr\u003e\u003cbr\u003eThis \u003cstrong\u003ethermoelectric peltier\u003c\/strong\u003e device uses 127 semiconductor couples to create an instant temperature differential — one side cools while the opposite side heats. By reversing polarity, you can easily switch between heating and cooling. You can even use the temperature gradient to generate electricity in experimental setups, which makes this \u003cstrong\u003epeltier element cooler\u003c\/strong\u003e useful for both learning and practical use. \u003cbr\u003e\u003cbr\u003eTo achieve the best results, heat must be removed from the hot side using a heatsink or metal block. Without proper dissipation, this \u003cstrong\u003ethermoelectric peltier\u003c\/strong\u003e module will reach thermal balance quickly and stop cooling. A CPU-style heatsink works perfectly. Considering its strong performance and competitive \u003cstrong\u003ethermoelectric module price\u003c\/strong\u003e, this model is popular in maker and industrial applications. \u003cbr\u003e\u003cbr\u003eAs a solid-state \u003cstrong\u003epeltier element cooler\u003c\/strong\u003e, it operates silently with no moving parts — making it ideal for CPUs, sensors, portable cooling devices, and DIY temperature regulation. Its balance of cost and function also provides one of the most efficient options in its \u003cstrong\u003ethermoelectric module price\u003c\/strong\u003e category. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAlso known as:\u003c\/strong\u003e TEC modules, Peltier cooling plates, thermoelectric coolers. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOperating Tips:\u003c\/strong\u003e Do not exceed rated current or voltage. Apply moisture protection in final installations. Life expectancy: ~200,000 hours Failure rate: ~0.2% \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The hot side always requires a heatsink. Running this \u003cstrong\u003ethermoelectric peltier\u003c\/strong\u003e without cooling — even for seconds — may damage the module.\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003eTechnical Details\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003eModel No.: TEC1 12710\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 12V DC\u003c\/li\u003e\n\u003cli\u003eOperating Current: 10A\u003c\/li\u003e\n\u003cli\u003eMax. Voltage: 15V\u003c\/li\u003e\n\u003cli\u003eMax. Power: 120W\u003c\/li\u003e\n\u003cli\u003eInternal Resistance: 1.2 to 1.5 Ω\u003c\/li\u003e\n\u003cli\u003eWire Length: 170 mm\u003c\/li\u003e\n\u003cli\u003eDimensions: 40 × 40 × 3.6 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 28 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003eFeatures\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds ls-n\"\u003e\n\u003cli\u003eCompact 40×40 mm size — ideal for space-limited cooling.\u003c\/li\u003e\n\u003cli\u003eSilent, solid-state heat transfer.\u003c\/li\u003e\n\u003cli\u003eHigh-quality cooling cells — optimized \u003cstrong\u003ethermoelectric peltier\u003c\/strong\u003e operation.\u003c\/li\u003e\n\u003cli\u003eSimple to install and wire.\u003c\/li\u003e\n\u003cli\u003eReversible polarity — heat or cool instantly.\u003c\/li\u003e\n\u003cli\u003eRequires heatsink for safe continuous use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch2 class=\"sing--sub-heading\"\u003e\u003cspan style=\"font-size: 18.72px;\"\u003eApplications :\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectronic Cooling:\u003c\/strong\u003e Ideal for CPUs, GPUs, and high-power electronics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMini Refrigeration:\u003c\/strong\u003e Portable cooling boxes and mini-fridges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser \u0026amp; Optical Equipment:\u003c\/strong\u003e Temperature-stabilizing control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedical Cooling:\u003c\/strong\u003e Portable lab or storage devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDIY Projects:\u003c\/strong\u003e Excellent \u003cstrong\u003ethermoelectric peltier\u003c\/strong\u003e solution for experiments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial Heat Management:\u003c\/strong\u003e Enclosure and equipment cooling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003ePhysical Attributes\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003eL × W × H (mm): 40 × 40 × 3.6\u003c\/li\u003e\n\u003cli\u003eWeight: 28 g\u003c\/li\u003e\n\u003cli\u003eWire Length: 170 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003ePackage Includes\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds ls-n\"\u003e\n\u003cli\u003e1 × TEC1-12710 40x40 mm \u003cstrong\u003ethermoelectric peltier\u003c\/strong\u003e Cooler 10A Module\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"KitsGuru","offers":[{"title":"Default Title","offer_id":43680986857724,"sku":"KG809","price":359.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0587\/2130\/4757\/products\/tec1-12710-40x40mm-front.jpg?v=1765266215"},{"product_id":"thermoelectric-peltier-refrigeration-cooling-system-diy-kit","title":"Thermoelectric Peltier Refrigeration Cooling System DIY Kit","description":"\u003cdiv class=\"product_info\"\u003e\n\u003ch2 class=\"sing--sub-heading\"\u003e\u003cspan style=\"font-size: 18.72px;\"\u003e\u003cstrong\u003e12v peltier module\u003c\/strong\u003e Thermoelectric Peltier Refrigeration Cooling System DIY Kit\u003c\/span\u003e\u003c\/h2\u003e\nSemiconductor coolers are a form of solid-state cooling that incorporates both semiconductor technologies and electronic assembly techniques. This DIY kit offers efficient cooling for compact applications using a \u003cstrong\u003e12v peltier module\u003c\/strong\u003e, making it suitable for small fridges and pet-house cooling. Additionally, it works well for creative projects requiring a \u003cstrong\u003emini peltier module\u003c\/strong\u003e or experiments with the \u003cstrong\u003ebest peltier module for generating electricity\u003c\/strong\u003e in controlled setups. \u003cbr\u003e\u003cbr\u003eThe kit is a semiconductor cooling kit that uses a \u003cstrong\u003eTEC1-12706 Thermoelectric Cooler 6A Peltier Module\u003c\/strong\u003e. The larger heat sink supports heat dissipation while the smaller one maintains the low-temperature surface. Naturally, the larger the heat sink, the better the cooling performance. \u003cbr\u003e\u003cbr\u003eThe fan included in the kit acts as a radiator and remains attached to the bigger heat sink. The \u003cstrong\u003e12v peltier module\u003c\/strong\u003e is placed between both heat sinks, leading to rapid temperature reduction on the cool side. \u003cbr\u003e\u003cbr\u003eCompact in design and easy to assemble, this cooling kit suits pet-space air conditioning (dog houses, small chicken coops, etc.) and personal refrigeration projects. You can also explore its capabilities similar to a \u003cstrong\u003emini peltier module\u003c\/strong\u003e for electronics cooling or thermal testing. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This is a disassembled kit. The kit does not include the TEC1-12706 Thermoelectric Peltier Module, which is available separately on \u003cstrong\u003eKitsGuru.com\u003c\/strong\u003e. Please allow a manual tolerance of 5% on dimensions.\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003eTechnical Details\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003eOperating Voltage: 12V DC\u003c\/li\u003e\n\u003cli\u003eOperating Current: 6A\u003c\/li\u003e\n\u003cli\u003eMaterial: Metal and Plastic\u003c\/li\u003e\n\u003cli\u003eWeight: 366g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003eFeatures\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds ls-n\"\u003e\n\u003cli\u003eCompact and space-saving design with simple installation.\u003c\/li\u003e\n\u003cli\u003eSilent, vibration-free solid-state cooling operation.\u003c\/li\u003e\n\u003cli\u003eIdeal for pet-air conditioning or cooling boxes powered by a \u003cstrong\u003e12v peltier module\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eGreat for innovative DIY thermal projects where the \u003cstrong\u003ebest peltier module for generating electricity\u003c\/strong\u003e can be compared for efficiency.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch2 class=\"sing--sub-heading\"\u003e\u003cspan style=\"font-size: 18.72px;\"\u003eApplications :\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMini Refrigeration:\u003c\/strong\u003e Suitable for small fridges and coolers using a \u003cstrong\u003emini peltier module\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectronics Cooling:\u003c\/strong\u003e Regulates temperature for CPUs, GPUs, and compact power systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDIY Cooling Projects:\u003c\/strong\u003e Perfect for experimental cooling with a \u003cstrong\u003e12v peltier module\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedical \u0026amp; Laboratory Use:\u003c\/strong\u003e Maintains stable temperature environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser \u0026amp; Optical Equipment:\u003c\/strong\u003e Supports precision thermal regulation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial Heat Management:\u003c\/strong\u003e Controls heat in enclosed electronic housings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003ePhysical Attributes\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003eMaterial: Metal and plastic\u003c\/li\u003e\n\u003cli\u003eL x W x H (mm): 220 x 140 x 40\u003c\/li\u003e\n\u003cli\u003eWeight (gm): 347\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003ePackage Includes\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds ls-n\"\u003e\n\u003cli\u003e1 x Cooling Fan\u003c\/li\u003e\n\u003cli\u003e1 x Fan Gauze\u003c\/li\u003e\n\u003cli\u003e1 x Guide Cold Plate\u003c\/li\u003e\n\u003cli\u003e1 x Radiator\u003c\/li\u003e\n\u003cli\u003e1 x Thermal Insulation Gasket\u003c\/li\u003e\n\u003cli\u003e1 x Pack of Screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"KitsGuru","offers":[{"title":"Default Title","offer_id":43681071137020,"sku":"KG812","price":449.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0587\/2130\/4757\/files\/diy-peltier-kit-front.jpg?v=1765268681"},{"product_id":"tec1-12715-thermoelectric-peltier","title":"TEC1-12715 40x40mm Thermoelectric Cooler 15A Peltier Module","description":"\u003cdiv class=\"product_info\"\u003e\n\u003ch2 class=\"sing--sub-heading\"\u003e\u003cspan style=\"font-size: 18.72px;\"\u003e\u003cstrong\u003ePeltier Module Price\u003c\/strong\u003e \u0026amp; TEC1-12715 40x40 mm 15A Cooler\u003c\/span\u003e\u003c\/h2\u003e\nLooking for a high-power cooling solution with great value? The TEC1-12715 40x40 mm 15A unit offers one of the best \u003cstrong\u003epeltier module price\u003c\/strong\u003e to performance ratios on the market. As our flagship model, this module — labeled \u003cstrong\u003etec1 12715\u003c\/strong\u003e — delivers robust cooling\/heating via a solid-state thermoelectric effect, making it ideal for custom builds or production setups. \u003cbr\u003e\u003cbr\u003eThis module functions as a versatile \u003cstrong\u003eair cooler with peltier module\u003c\/strong\u003e that creates a thermal differential: one side gets cold while the other side becomes hot. By reversing the polarity, you can choose cooling or heating mode. Additionally, when properly heat-managed, this module remains efficient over long durations. \u003cbr\u003e\u003cbr\u003eFor consistent cooling, always attach a heatsink to dissipate heat from the hot side. Without proper heat dissipation, even the best TEC fails. With the \u003cstrong\u003etec1 12715\u003c\/strong\u003e, we recommend a CPU-style heatsink or metal block — in tests, this setup provided rapid cold-side cooling performance. Given its performance and \u003cstrong\u003epeltier module price\u003c\/strong\u003e, this module offers strong value for money. \u003cbr\u003e\u003cbr\u003eOur \u003cstrong\u003eair cooler with peltier module\u003c\/strong\u003e is suitable for various applications — from mini refrigerators to industrial cooling units, medical devices, laser systems, and DIY projects. Its solid-state design ensures silent, vibration-free performance, and easy installation. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAlso known as:\u003c\/strong\u003e Thermoelectric cooling modules, TEC modules, semiconductor coolers. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOperating Tips:\u003c\/strong\u003e Do not exceed rated Imax or Vmax. Provide proper moisture sealing when used in final applications. Life expectancy: approx. 200,000 hours Failure rate: ~0.2% \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant Note:\u003c\/strong\u003e The hot side must always have a heatsink. Running this module for more than a few seconds without heat dissipation — even if idle — may damage it.\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003eTechnical Details\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003eMax. Power: 230W\u003c\/li\u003e\n\u003cli\u003eWire Length: 300 mm\u003c\/li\u003e\n\u003cli\u003eDimensions: 40 x 40 x 3.6 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 25 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003eFeatures\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds ls-n\"\u003e\n\u003cli\u003eCompact module size ideal for tight spaces.\u003c\/li\u003e\n\u003cli\u003eReversible polarity — switch between cooling and heating easily.\u003c\/li\u003e\n\u003cli\u003eSolid-state cooling — no noise or vibration.\u003c\/li\u003e\n\u003cli\u003eQuality tested cooling cells for reliable performance.\u003c\/li\u003e\n\u003cli\u003eEasy to install and wire.\u003c\/li\u003e\n\u003cli\u003eRequires a heatsink for optimal operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch2 class=\"sing--sub-heading\"\u003eApplications :\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectronic Cooling:\u003c\/strong\u003e for CPUs, GPUs and power electronics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMini Refrigeration:\u003c\/strong\u003e compact fridges, beverage coolers, small cooling boxes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser \u0026amp; Optical Equipment:\u003c\/strong\u003e stable temperature control for sensors and diodes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedical \u0026amp; Lab Devices:\u003c\/strong\u003e portable cooling units and storage boxes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDIY \u0026amp; Experimental Builds:\u003c\/strong\u003e for hobbyist cooling experiments and custom projects with \u003cstrong\u003eair cooler with peltier module\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial Cooling:\u003c\/strong\u003e temperature regulation in machinery enclosures or electronics racks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003ePhysical Attributes\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003eDimensions: 40 x 40 x 3.6 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 25 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003ePackage Includes\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds ls-n\"\u003e\n\u003cli\u003e1 × TEC1-12715 40x40 mm Peltier Module (15A)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"KitsGuru","offers":[{"title":"Default Title","offer_id":44229074157820,"sku":"KG811","price":309.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0587\/2130\/4757\/products\/tec1-12715-front.jpg?v=1765268193"},{"product_id":"tec1-12708-thermoelectric-peltier","title":"TEC1-12708 40x40mm Thermoelectric Cooler 8A Peltier Module","description":"\u003cdiv class=\"product_info\"\u003e\n\u003ch2 class=\"sing--sub-heading\"\u003e\u003cspan style=\"font-size: 18.72px;\"\u003e TEC1-12708 40x40mm \u003cstrong\u003ethermoelectric peltier device\u003c\/strong\u003e 8A Cooler Module \u003c\/span\u003e\u003c\/h2\u003e\nThe TEC1-12708 is a compact and efficient 12V 8A \u003cstrong\u003ethermoelectric peltier device\u003c\/strong\u003e designed for cooling a wide range of electronics. With its 40×40 mm compact footprint, this \u003cstrong\u003epeltier cooling module\u003c\/strong\u003e is ideal for cooling components like CPUs and sensors. The TEC technology enables heat transfer through semiconductor material, making this \u003cstrong\u003etec peltier module\u003c\/strong\u003e suitable for DIY and professional thermal management projects.\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003eTechnical Details\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003eModel No.: TEC1 12708\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 12V DC\u003c\/li\u003e\n\u003cli\u003eOperating Current: 6.5A\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -55℃ to 83℃\u003c\/li\u003e\n\u003cli\u003eAssembly Pressure: 85N\/cm²\u003c\/li\u003e\n\u003cli\u003eDimensions: 40 x 40 x 3.5 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003eFeatures\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds ls-n\"\u003e\n\u003cli\u003eEasy to install and use\u003c\/li\u003e\n\u003cli\u003eDurable and good quality product\u003c\/li\u003e\n\u003cli\u003eNumber of component pairs: 127 pcs\u003c\/li\u003e\n\u003cli\u003eMaximum temperature difference: △Tmax(Qc=0) Above 67℃\u003c\/li\u003e\n\u003cli\u003eWorks efficiently as a \u003cstrong\u003etec peltier module\u003c\/strong\u003e for stable cooling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch2 class=\"sing--sub-heading\"\u003e\u003cspan style=\"font-size: 18.72px;\"\u003eApplications :\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectronic Cooling:\u003c\/strong\u003e Ideal \u003cstrong\u003epeltier cooling module\u003c\/strong\u003e for CPUs, GPUs, and microcontrollers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMini Refrigeration:\u003c\/strong\u003e Useful for DIY beverage coolers and mini-fridges powered by a \u003cstrong\u003ethermoelectric peltier device\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser \u0026amp; Optical Equipment:\u003c\/strong\u003e Maintains a stable temperature using a compact \u003cstrong\u003etec peltier module\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedical Equipment:\u003c\/strong\u003e Portable vaccine cooling solutions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDIY Projects:\u003c\/strong\u003e Perfect for experimental cooling setups requiring a \u003cstrong\u003ethermoelectric peltier device\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003ePhysical Attributes\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003eDimensions: 40 x 40 x 3.5 mm\u003c\/li\u003e\n\u003cli\u003eWeight(gm): 23\u003c\/li\u003e\n\u003cli\u003eWire Length(mm): 300\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003ePackage Includes\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds ls-n\"\u003e\n\u003cli\u003e1 x TEC1-12708 40x40mm Thermoelectric Cooler 8A Peltier Module\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"KitsGuru","offers":[{"title":"Default Title","offer_id":44229080219900,"sku":"KG807","price":399.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0587\/2130\/4757\/products\/tec1-12708-40x40mm-front.jpg?v=1765260899"},{"product_id":"tec1-sp1848-27145-tec-thermoelectric-heatsink-cooler-peltier-plate-module","title":"SP1848-27145 Thermoelectric Power Generator\/Thermocooler Peltier Module","description":"\u003cdiv class=\"product_info\"\u003e\n\u003ch2 class=\"sing--sub-heading\"\u003e\u003cspan style=\"font-size: 18.72px;\"\u003eSP1848-27145 Thermoelectric Power Generator\/Thermocooler Peltier Module\u003c\/span\u003e\u003c\/h2\u003e\nThe \u003cstrong\u003epeltier thermoelectric cooler\u003c\/strong\u003e SP1848-27145 is a compact and efficient module based on the Peltier effect, capable of generating electrical power from a temperature difference. This \u003cstrong\u003epeltier thermoelectric cooler\u003c\/strong\u003e operates up to 120°C and delivers varying voltage and current outputs depending on the applied heat. When combined with a proper \u003cstrong\u003epeltier module heat sink\u003c\/strong\u003e, the \u003cstrong\u003esp1848 27145\u003c\/strong\u003e module performs reliably in both power generation and thermal management applications.\u003cbr\u003e\u003cbr\u003eThermoelectric power generators, commonly known as Peltier or TEG modules, work by creating a temperature differential between two surfaces. By applying heat on one side and cooling the other using a \u003cstrong\u003epeltier module heat sink\u003c\/strong\u003e, the \u003cstrong\u003epeltier thermoelectric cooler\u003c\/strong\u003e begins generating voltage proportional to the heat applied. As a result, the \u003cstrong\u003esp1848 27145\u003c\/strong\u003e module can produce a moderate voltage output with milliamp-level current.\u003cbr\u003e\u003cbr\u003eWhen heat is applied to one side and cooling is maintained on the opposite side, the \u003cstrong\u003epeltier thermoelectric cooler\u003c\/strong\u003e efficiently converts thermal energy into electrical energy. For optimal performance and longevity, it is recommended to use thermal grease and a suitable \u003cstrong\u003epeltier module heat sink\u003c\/strong\u003e. The \u003cstrong\u003esp1848 27145\u003c\/strong\u003e module offers a long life expectancy of up to 200,000 hours with a low failure rate of 0.2% based on long-term testing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOperating Tips:\u003c\/strong\u003e Do not exceed the maximum operating temperature of the module.\u003cbr\u003eLife expectancy: 200,000 hours.\u003cbr\u003eFailure rate based on longtime testings: 0.2%.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant Note!!\u003c\/strong\u003e MODEL NUMBER SIDE IS EXPOSED TO “HEAT-SINK or ICE” AND OPPOSITE SIDE TO “HEAT”.\u003cbr\u003e\u003cbr\u003ePlace 2–3 drops of grease compound on both sides of the TEG module.\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003eTechnical Details\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003eModel No.: SP1848 27145\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: 0 to 120°C\u003c\/li\u003e\n\u003cli\u003eMax Operating Temperature: 120°C\u003c\/li\u003e\n\u003cli\u003eWire Length: 350mm\u003c\/li\u003e\n\u003cli\u003eLength: 40mm\u003c\/li\u003e\n\u003cli\u003eWidth: 40mm\u003c\/li\u003e\n\u003cli\u003eHeight: 3.6mm\u003c\/li\u003e\n\u003cli\u003eWeight: 24\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003eFeatures\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003eSmall and lightweight design for easy installation\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for thermoelectric power generation\u003c\/li\u003e\n\u003cli\u003eSealed construction with optimized thermal elements\u003c\/li\u003e\n\u003cli\u003eSupports high operating temperatures up to 120°C\u003c\/li\u003e\n\u003cli\u003eQuality-tested thermoelectric cooling cells\u003c\/li\u003e\n\u003cli\u003eSimple to install and operate\u003c\/li\u003e\n\u003cli\u003eCompatible with 5V booster boards for charging applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch2 class=\"sing--sub-heading\"\u003e\u003cspan style=\"font-size: 18.72px;\"\u003eApplications :\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling Systems for Electronics:\u003c\/strong\u003e Helps manage heat in CPUs, GPUs, and power electronics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePortable Refrigeration:\u003c\/strong\u003e Suitable for compact coolers and beverage chillers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaboratory Temperature Control:\u003c\/strong\u003e Enables precise thermal regulation in experiments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar-Powered Cooling:\u003c\/strong\u003e Used in eco-friendly thermoelectric cooling systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomotive Thermal Management:\u003c\/strong\u003e Maintains temperature stability in vehicle electronics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003eIntegration with Arduino\u003c\/h3\u003e\n\u003cdiv style=\"text-align: center;\" id=\"p_info\"\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" alt=\"sp1848-peltier-module-arduino\" height=\"75%\" width=\"95%\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0587\/2130\/4757\/files\/TEC1-12706-with-Arduino.png?v=1638252165\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003eSample Code\u003c\/h3\u003e\n\u003cscript src=\"https:\/\/gist.github.com\/labsguru\/2b359f437e627b4c707be926dadcb800.js\"\u003e\u003c\/script\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003ePhysical Attributes\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds\"\u003e\n\u003cli\u003eL x W x H (mm): 40 x 40 x 3.6\u003c\/li\u003e\n\u003cli\u003eWeight (gm): 24\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_info\"\u003e\n\u003ch3 class=\"sing--sub-heading\"\u003ePackage Includes\u003c\/h3\u003e\n\u003cdiv id=\"p_info\"\u003e\n\u003cul class=\"pro-ds ls-n\"\u003e\n\u003cli\u003e1 x SP1848-27145 Thermoelectric Power Generator\/Thermocooler Peltier Module\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"KitsGuru","offers":[{"title":"Default Title","offer_id":46846982291708,"sku":"KG598","price":240.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0587\/2130\/4757\/products\/peltier-thermoelectric-cooler-sp1848.jpg?v=1765516201"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0587\/2130\/4757\/collections\/12_45e6a793-a05f-4d7b-ae67-e36429b22f80.jpg?v=1677305593","url":"https:\/\/kitsguru.com\/de\/collections\/thermoelectric-peltier-cooler-and-heating-elements.oembed","provider":"KitsGuru","version":"1.0","type":"link"}