Open Source Serial Data Logger ATmega328 Microcontroller MicroSD Module
The module supports a 3.3V–12V DC operating voltage and microSD memory cards up to 32GB. Featuring configurable baud rates from 300 to 1,000,000 bps, two status LEDs, Arduino IDE programmable firmware, and low power consumption, it provides a convenient solution for serial data recording. Its compact 19 × 15 × 4mm design makes it suitable for data acquisition, sensor monitoring, robotics, and DIY electronic applications.
Open Source Serial Data Logger ATmega328 Microcontroller MicroSD Module
Available:In Stock
- Product SKU: KG654
₹ 689
₹ 899
Need Volume Discounts? Deals are specially designed for you. Click here
Need Customization? Provide us more details Click here
🏠
Warehouse Details:
Specification
Description
OpenLog ATmega328P MicroSD Card Data Logger Module for Arduino
The OpenLog ATmega328P Data Logger Module is a compact, lightweight, and efficient serial data logging module designed for Arduino, microcontrollers, robotics, and embedded electronics projects. Featuring an ATmega328P microcontroller and UART serial communication interface, this module records incoming serial data directly onto a microSD memory card for convenient storage, monitoring, and analysis.The module supports a 3.3V–12V DC operating voltage and microSD memory cards up to 32GB. Featuring configurable baud rates from 300 to 1,000,000 bps, two status LEDs, Arduino IDE programmable firmware, and low power consumption, it provides a convenient solution for serial data recording. Its compact 19 × 15 × 4mm design makes it suitable for data acquisition, sensor monitoring, robotics, and DIY electronic applications.
Features
- ATmega328P-based serial data logger
- Supports microSD cards up to 32GB
- UART serial communication interface
- 3.3V–12V DC operating voltage
- Configurable baud rate from 300 to 1,000,000 bps
- Low power consumption design
- Approximately 6mA maximum operating current
- Approximately 2mA idle current
- Two onboard status LEDs
- Programmable using Arduino IDE
- Simple serial command configuration
- Compact and lightweight PCB design
Working Principle
The OpenLog Data Logger Module operates by receiving serial data from a compatible microcontroller, sensor system, or electronic device through its UART communication interface.
The onboard ATmega328P microcontroller processes the incoming serial data and writes it to a compatible microSD memory card. This allows recorded information to be stored for later retrieval and analysis.
The module uses a configurable serial baud rate to communicate with connected devices. Its two status LEDs provide visual indications of module activity, while the compact and low-power design makes it suitable for continuous data recording applications within the supported operating conditions.
The onboard ATmega328P microcontroller processes the incoming serial data and writes it to a compatible microSD memory card. This allows recorded information to be stored for later retrieval and analysis.
The module uses a configurable serial baud rate to communicate with connected devices. Its two status LEDs provide visual indications of module activity, while the compact and low-power design makes it suitable for continuous data recording applications within the supported operating conditions.
UART Interface and Connection
- VCC: DC Power Supply Input
- GND: Common Ground Connection
- RX: UART Serial Data Input
- TX: UART Serial Data Output
- microSD Slot: Memory Card Storage Interface
- Status LEDs: Module Activity Indication
Recommended Microcontroller and Memory Card
- Compatible Controllers: Arduino and UART-Enabled Microcontrollers
- Communication Interface: UART Serial
- Operating Supply: 3.3V–12V DC
- Memory Card Type: microSD
- Maximum Supported Capacity: 32GB
- Baud Rate Range: 300–1,000,000 bps
- Programming: Arduino IDE
- Storage Application: Serial Data Logging
Technical Details
- Item Type: Serial Data Logger Module
- Product Name: OpenLog Data Logger
- Microcontroller: ATmega328P
- Microcontroller Architecture: 8-Bit AVR
- Communication Interface: UART
- Serial Pins: RX and TX
- Operating Voltage: 3.3V–12V DC
- Maximum Operating Current: 6mA (Specified)
- Idle Current: 2mA (Specified)
- Memory Card Type: microSD
- Maximum Memory Capacity: 32GB
- Configurable Baud Rate: 300–1,000,000 bps
- Firmware Programming: Arduino IDE
- Configuration: Serial Commands
- Status Indicators: 2 LEDs
- Module Length: 19mm
- Module Width: 15mm
- Module Height: 4mm
- Primary Function: Serial Data Storage
- Application: Microcontroller and Sensor Data Logging
Data Logging Functions
- Receives UART serial data
- Stores data on compatible microSD cards
- Supports configurable communication speed
- Allows serial command-based configuration
- Supports firmware programming through Arduino IDE
- Provides status indication through onboard LEDs
Applications
- Arduino serial data logging
- Sensor data recording
- Robotics and automation projects
- Embedded system debugging
- GPS data logging projects
- Environmental monitoring systems
- Microcontroller data acquisition
- Educational electronics projects
Physical Attributes
- Module Length: 19mm
- Module Width: 15mm
- Module Height: 4mm
- PCB Type: Compact Electronic Module
- Memory Interface: microSD Card Slot
- Communication: UART Pin Interface
- Status Indicators: Two LEDs
- Compact and Lightweight Construction
Installation and Usage Instructions
- Disconnect the power supply before installation.
- Insert a compatible microSD card into the module.
- Connect the module GND to the microcontroller GND.
- Connect the module VCC to a suitable DC supply.
- Connect the microcontroller TX pin to the OpenLog RX input.
- Connect the OpenLog TX pin to the microcontroller RX pin if two-way communication is required.
- Configure matching UART baud rates on both devices.
- Power the module and check the status indicators.
- Send serial data from the connected microcontroller.
- Safely stop logging and disconnect power before removing the memory card.
- Read the recorded files using a compatible computer or card reader.
Frequently Asked Questions (FAQs)
- What is OpenLog used for? Recording UART serial data onto a microSD memory card.
- Which microcontroller is used? ATmega328P.
- What is the operating voltage? 3.3V–12V DC.
- What is the maximum supported memory card capacity? 32GB.
- Which communication interface is supported? UART serial communication.
- Can it be used with Arduino? Yes, with compatible serial connections and voltage levels.
- What baud rates are supported? Configurable from 300 to 1,000,000 bps.
- How many status LEDs are provided? Two.
- Can its firmware be programmed? Yes, using the Arduino IDE.
- Is a microSD card included? No, it is sold separately.
Safety Precautions
- Use a power supply within the specified voltage range.
- Verify VCC and GND polarity before connecting.
- Check UART signal voltage compatibility.
- Do not exceed the supported input voltage.
- Disconnect power before changing wiring.
- Avoid removing the microSD card during active logging.
- Protect the PCB from moisture and short circuits.
- Use a compatible and properly formatted memory card.
Package Includes
- 1 × OpenLog ATmega328P MicroSD Card Data Logger Module