15-step digital power supply
₹4,661 – ₹5,847
- Product Code:LGEE047
- Power supply: No battey included,includes DC adapter if required with the kit
- Full documentation,includes circuit diagram,PCB layout,power point presentation,testing document etc
- Video tutorial are available on YouTube, No separate CD will be provided
- Cash on Delivery
- Netbanking/Debit/Credit cards
Shipping DetailsUsually delivery in 2-3 days
Here is a simple circuit to obtain variable DC voltage from 1.25V to 15.19V in reasonably small steps. The input voltage may lie anywhere between 20V and 35V. The first section of the circuit comprises a digital up-down counter built around IC a quad 2-input NAND schmitt trigger (4093), a binary up-down counter (4029).Two gates of IC 4093 are used to generate up-down logic using push buttons S1 and S2, respectively, while the other two gates form an oscillator to provide clock pulses to IC (4029). The frequency of oscillations can be varied by changing the value of capacitor or preset.
When the power is switched on, resets itself, and hence the output at pins 6, 11, 14, and 12 is equivalent to binary zero, i.e. ‘0000’. The corresponding DC output of the circuit is minimum (1.25V). As count-up switch S1 is pressed, the binary count of IC increases and the output starts increasing too. At the highest count output of 1111, the output voltage is 15.19V (assuming the in-circuit resistance of preset as zero). Preset can be used for trimming the output voltage as desired. To decrease the output voltage within the range of 1.25V to 15.2V, count-down switch S2 is to be depressed.
- Dimensions (cm) LxWxH: 30 x 30 X 15
- Weight (kg): 0.9