Pump motor or lift motor burn out protection
₹3,200 – ₹5,500
- Product Code: LGEE039
- Power supply:No battery included, includes 12 volt DC adapter with the kit
- Cash on Delivery
- Debit cards/Credit cards
Shipping DetailsUsually delivered in 3-5 days International Shipping Not Available
Protection of a pump motor or lift motor against possible problems, such as single-phasing and over-temperature occurring in the course of its operation is very important, because it is used intensively in industry as an actuator. IMs can be protected using some components, such as contractors, voltage and current relays by implanting proper sensing device to maintain the device operation in the threshold range and protect the device from being damaged.
The kit basically consists of sensor to check motor parameters. The basic idea for the development of the kit is to provide safety to the pump/lift Motor if any of the phases, out of the 3 phases is missing and also if the temperature of the motor during operation exceeds the prescribed value, it stops immediately.
There is monitoring unit to check the temperature using DS18B20, dry run of the motor using IR sensor, over current using ACS712 current sensor and phase failure using the switch arrangement. This all unit is interface to the AVR microcontroller to check the fault and according drive the load that is turn on /off. The status of the parameter that is ok or fault is displayed on 16×2 LCD.
- Dimensions (cm) LxWxH: 30 x 30 x 15
- Weight (gm): 1000