Real Time Clock DS1307 RTC I2C Module AT24C32 without battery
Review: 5 - "A masterpiece of literature" by , written on May 4, 20020

Real Time Clock DS1307 RTC I2C Module AT24C32 without battery

Available:In Stock
  • Product SKU: KG070
₹ 60 ₹ 99
Available offers
Best Rates

on Express Shipping – Hurry! Shipping starts from Rs59.

Free Shipping Offer -

Avail free shipping on all orders above Rs999.

Volume Discounts-

Buy More Save More! Discounts upto 20%. Contact us.

Special Bulk Discounts

for colleges, Schools, Companies and resellers

Cash on Delivery

Available above Rs 999

  • Original, High Quality
  • KitsGuru Warranty
  • Email Support
  • Video Support to be purchased separately
Easy Payment Options
  • Netbanking
  • Debit/Credit cards
  • Cash on Delivery
  • E-wallets/UPI
Shipping Details
International Shipping

  Need Volume Discounts? Deals are specially designed for you. Click here

  Need Customization? Provide us more details Click here

Warehouse Details

  • Order within



The DS1307 real-time clock (RTC) IC can provide a clock for the microcontroller. It is an 8 pin device using an I2C interface. The DS1307 is a low-power clock/calendar with 56 bytes of battery backup SRAM. The clock/calendar provides seconds, minutes, hours, day, date, month and year qualified data. The end date of each month is automatically adjusted, especially for months with less than 31 days.

The Real-Time Clock DS1307 RTC I2C Module circuits (ICs) and supervise timing like a clock and also operate date like a calendar. The main advantage of RTC is that they have an arrangement of battery back up which keeps the clock/calendar running even if there is a power failure. An exceptionally little current is required for keeping the RTC animated. In this article, we are going to see one of the real-time clocks (RTC), i.e. DS1307.

  • Made of good quality material.
  • DS1307 I2C real time clock (RTC) chip 24C32 memory 32K I2C EEPROM.
  • The module comes fully assembled. CR2032 battery includes
  • Designed for Arduino small RTC.
  • We can find these RTCs in many applications like embedded systems and computer motherboards, etc.

Pin Description of DS1307:

  • Pin 1, 2: Connections for standard 32.768 kHz quartz crystal. The internal oscillator circuitry is intended for operation with a crystal having a specified load capacitance of 12.5pF. X1 is the input to the oscillator and can alternatively be connected to an external 32.768 kHz oscillator. The output of the internal oscillator, X2 is drifted if an external oscillator is connected to X1.
  • Pin 3: Battery input for any standard 3V lithium cell or another energy source. Battery voltage should be between 2V and 3.5V for suitable operation. The nominal write-protect trip point voltage at which access to the RTC and user RAM is denied is set by the internal circuitry as 1.25 x VBAT nominal. A lithium battery with 48mAhr or greater will backup the DS1307 for more than 10 years in the absence of power at 25ºC. UL recognized to ensure against reverse charging current when utilized as a part of conjunction with a lithium battery.
  • Pin 4: Ground.
  • Pin 5: Serial data input/output. The input/output for the I2C serial interface is the SDA, which is the open drain and requires a pull-up resistor, allowing a pull-up voltage to 5.5V. Regardless of the voltage on VCC.
  • Pin 6: Serial clock input. It is the I2C interface clock input and is used in data synchronization.
  • Pin 7: Square wave/output driver. When enabled, the SQWE bit set to 1, the SQW/OUT pin outputs one of four square-wave frequencies (1Hz, 4 kHz, 8 kHz, and 32 kHz). This is also an open drain and requires an external pull-up resistor. It requires the application of either Vcc or Vb at to operate SQW/OUT, with an allowable pull-up voltage of 5.5V and can be left floating, if not used.
  • Pin 8: Primary power supply. When the voltage is applied within normal limits, the device is fully accessible and data can be written and read. When a backup supply is connected to the device and VCC is below VTP, read and writes are inhibited. However, at low voltages, the timekeeping function still functions.

Technical Details

  • Battery : IR2032

Physical Attributes

  • PCB Size ( L x W ) mm : 28 x 28
  • Weight (gm) : 7

Integration with Arduino

Sample Code

Additional Details

  • This is the DS1307 Real Time Clock developed by one of our designers.
  • Two-wire I2C interface.
  • Hour: Minutes: Seconds AM/PM.
  • Day Month, Date – Year.
  • DS1307 based RTC with LIR2032 battery (Battery include).
  • 1Hz output pin.
  • Consumes less than 500nA in battery backup mode with oscillator running
  • Available in 8-pin DIP or SOIC
  • Underwriters Laboratory (UL) recognized
  • Real-time clock (RTC) counts seconds, minutes, hours, date of the month, month, day of the week, and year with leap-year compensation valid up to 2100
  • 56-byte non-volatile RAM for data storage
  • 56 Bytes of Non-volatile memory available to the user.
  • The DS1307 is accessed via the I2C protocol.
  • The module comes fully assembled and pre-programmed with the current time.

Product Video


Customer Reviews

Based on 5 reviews
manoj kumar
Battery included.

Battery included.

Nothing, its good

Order received earlier than the deadline. thank you for this seller.

Wayne Morgan
arduino support

does it work with arduino uno

Good piece of kit

I have been using these RTC modules for a while and, whilst they are not the most stable time keepers, they are perfectly suitable for my needs - remote monitoring of various values using Arduinos and ESP32s (temperature, pressure etc.)

dal chand
serves requirement

serves requirement