Original Pixhawk PX4 Autopilot 32 Bit PIX 2.4.8 Drone Flight Controller with cables and Buzzer
Cables: The package typically includes various cables for connecting the Pixhawk to other peripherals such as GPS modules, telemetry systems, power sources, and other sensors. These cables are essential for the proper functioning of the autopilot system.
Buzzer: The buzzer is a small audio device that can be used for providing audible alerts and notifications. In the context of a drone flight controller, it can be programmed to emit different sounds to indicate various status conditions, such as low battery warnings or successful mission completion.
14 PWM / servo output.
Bus interface (UART, I2C, SPI, CAN).
The integrated backup power and backup controller fail, and the primary controller fails over to the backup control is safe.
Provide automatic and manual modes.
Provide redundant power input and failover.
Multicolor LED lights.
Provide a multi-tone buzzer Interface.
Micro SD recording flight data.
Original Pixhawk PX4 Autopilot 32 Bit PIX 2.4.8 Drone Flight Controller with cables and Buzzer
Available:In Stock
- Product SKU: LGAR081
₹ 10,999
₹ 17,599
Need Volume Discounts? Deals are specially designed for you. Click here
Need Customization? Provide us scrmore details Click here
Warehouse Details
Specification
Description
The Pixhawk PX4 is a popular open-source autopilot system used in various unmanned aerial vehicles (UAVs), including drones and other robotic applications. The Pixhawk PX4 Autopilot 32 Bit PIX 2.4.8 is a specific version of the Pixhawk flight controller.Here's a Breakdown of the Components Mentioned:
Pixhawk PX4 Autopilot 32 Bit PIX 2.4.8: This is the main flight controller unit. The "32 Bit" refers to the microcontroller's architecture, which is a 32-bit processor, providing more processing power and capabilities compared to older 8 or 16-bit systems. "PIX 2.4.8" likely denotes the hardware version.Cables: The package typically includes various cables for connecting the Pixhawk to other peripherals such as GPS modules, telemetry systems, power sources, and other sensors. These cables are essential for the proper functioning of the autopilot system.
Buzzer: The buzzer is a small audio device that can be used for providing audible alerts and notifications. In the context of a drone flight controller, it can be programmed to emit different sounds to indicate various status conditions, such as low battery warnings or successful mission completion.
Technical Details
- Model: PIX 2.4.8 32 Bit
- Input Voltage (V): 7V
- Firmware: Mission Planner
- Sensors: 3-axis Gyrometer, Accelerometer, High-performance Barometer, Magnetometer
- Processor: 32bit STM32F427 Cortex M4 core with FPU, The 32-bit STM32F103 failsafe Co-processor
- Micro-SD Card Slot: Yes
Features:
The advanced 32-bit ARM CortexM4 high-performance processors can run NuttX RTOS real-time operating system.14 PWM / servo output.
Bus interface (UART, I2C, SPI, CAN).
The integrated backup power and backup controller fail, and the primary controller fails over to the backup control is safe.
Provide automatic and manual modes.
Provide redundant power input and failover.
Multicolor LED lights.
Provide a multi-tone buzzer Interface.
Micro SD recording flight data.
Processor
- 32bit STM32F427 Cortex M4 core with FPU.
- 32-bit STM32F103 failsafe co-processor.
- 168 MHz.
- 128 KB RAM.
- 2 MB Flash
Sensors
- ST Micro L3GD20H 16 bit gyroscope
- ST Micro X4HBA 303H 14 bit accelerometer/magnetometer.
- Invensense MPU 6000 3-axis accelerometer/gyroscope
- MEAS MS5607 barometer
Interfaces:
- 5x UART (serial ports), one high-power capable, 2x with HW flow control.
- 2x CAN (one with an internal 3.3V transceiver, one on expansion connector)
- Spektrum DSM / DSM2 / DSM-X® Satellite compatible input
- Futaba S.BUS® compatible input and output.
- PPM sum signal input.
- RSSI (PWM or voltage) input.
- I2C
- SPI
- 3.3 and 6.6V ADC inputs.
- Internal micro USB port and external micro USB port extension.
Connections Ports :
Physical Attributes
- Dimensions (mm) LxWxH: 82 x 50 x 16
- Weight (gm): 81
Product Video
Package Includes
- 1 x Pixhawk 2.4.8 32 Bit Autopilot PX4 Drone Flight Controller.
- 2 x Connecting Cables
- 1 x Buzzer Module.
- 1 x Micro USB-A to Micro-B Cable -100cm