Infrared Reversing speed indicator electronic assembly and debugging DIY
![Infrared Reversing speed indicator electronic assembly and debugging DIY -1]()
![Infrared Reversing speed indicator electronic assembly and debugging DIY]()
![Infrared Reversing speed indicator electronic assembly and debugging DIY_1]()
![Infrared Reversing speed indicator electronic assembly and debugging DIY_2]()
![Infrared Reversing speed indicator electronic assembly and debugging DIY -1]()
![Infrared Reversing speed indicator electronic assembly and debugging DIY]()
![Infrared Reversing speed indicator electronic assembly and debugging DIY_1]()
![Infrared Reversing speed indicator electronic assembly and debugging DIY_2]()
Resistors: Identify the resistors based on their color codes and place them in the designated spots on the PCB.
Capacitors: Place the electrolytic capacitors (observe polarity) and ceramic capacitors in their respective positions.
Diodes: Ensure the correct orientation (check the stripe indicating the cathode).
Potentiometers: Solder these into the place where indicated.
LEDs: Insert the LEDs, ensuring the correct orientation (the longer leg is the anode).
Infrared LEDs and Photodiodes: Place these in the correct positions as per the instructions.
ICs: Carefully place the ICs in their sockets if provided, otherwise directly solder them, ensuring the correct orientation.
Soldering: Solder each component carefully, ensuring there are no cold joints or bridges. Trim the excess leads after soldering.
Connecting Wires and Connectors: Solder the connectors for the power supply and any other connections. Connect the wires for the power supply and sensors.
Powering Up and Calibration: Connect the power supply. Adjust the potentiometers to calibrate the sensors if necessary.
-25%
Infrared Reversing speed indicator electronic assembly and debugging DIY
Available:In Stock
- Product SKU: KG1118
₹ 299
₹ 399
Need Volume Discounts? Deals are specially designed for you. Click here
Need Customization? Provide us more details Click here
Warehouse Details
Specification
Description
This DIY infrared parking sensor kit includes various components that you will need to assemble on the provided PCB.Assembly Steps::
Identify and Place Components:Resistors: Identify the resistors based on their color codes and place them in the designated spots on the PCB.
Capacitors: Place the electrolytic capacitors (observe polarity) and ceramic capacitors in their respective positions.
Diodes: Ensure the correct orientation (check the stripe indicating the cathode).
Potentiometers: Solder these into the place where indicated.
LEDs: Insert the LEDs, ensuring the correct orientation (the longer leg is the anode).
Infrared LEDs and Photodiodes: Place these in the correct positions as per the instructions.
ICs: Carefully place the ICs in their sockets if provided, otherwise directly solder them, ensuring the correct orientation.
Soldering: Solder each component carefully, ensuring there are no cold joints or bridges. Trim the excess leads after soldering.
Connecting Wires and Connectors: Solder the connectors for the power supply and any other connections. Connect the wires for the power supply and sensors.
Testing:
Once all components are soldered, visually inspect for any potential issues like solder bridges. Use a multimeter to check for continuity and correct voltages.Powering Up and Calibration: Connect the power supply. Adjust the potentiometers to calibrate the sensors if necessary.
Components
- PCB (Printed Circuit Board)
- Capacitors (Electrolytic and Ceramic)
- Resistors
- Infrared LEDs (Likely the black ones)
- Photodiodes or Phototransistors (Likely the transparent ones)
- Standard LEDs (Red, Green, Yellow)
- Potentiometers
- Diodes
- ICs (Integrated Circuits)
- Connectors and Wires
Package Includes
- 1 x Infrared Reversing speed indicator electronic assembly and debugging DIY
Related items
₹ 27.00
₹ 39.00
₹ 61.00
₹ 149.00
₹ 171.00
₹ 269.00
₹ 33.00
₹ 59.00
