-28^%

DC-DC constant voltage constant current DC step-up + step-down module

400W DC-DC constant voltage constant current Buck Boost module

Available:Out of Stock

Product SKU: KG860

Wishlist

₹ 349 ~~₹ 489~~

Pre-order

Specification

Description

400W DC-DC constant voltage constant current Buck Boost module

This is a great DC-DC 400W 15A Boost Converter Step-up Module for electric equipment, digital products, laptops, etc. Input and output are designed with screw terminals for convenient wire connection and disconnection. High efficiency, the maximum conversion efficiency can be 96% and efficiency is related to input/output voltage, current, and voltage difference. There are 2 heat sinks that would ensure a better heat dissipation. It can also be used as a driver for high- power LED lights or a voltage regulator for solar panels.

This DC 400W 15A Step-Up Boost Converter can take an input voltage of anywhere from DC 8.5V-50V which can then be regulated to an output voltage between 10-60V continuously adjustable. With a wide input voltage range from 8.5V-50V, the Step-up converter can accurately adjust the output voltage and current.

The Boost module has 2 heat sinks that could enhance heat dissipation. Wiring is convenient with these large current 15A screw terminals.

Technical Details

Input Voltage (V): 8.5 – 50V
Output Voltage (V): 10 – 60V
Max. Input Current (A): 15
Max. Output Current (A): 12
Quiescent Current (mA): 10
Constant Current Range (A): 0.2 to 12
Operating Temperature: -40° to 85°
Size (L x B x W) mm: 67 x 48 x 28

Features

Input and output are designed with screw terminals for convenient wire connection and disconnection.
High efficiency, with a maximum conversion efficiency of up to 96% (efficiency depends on input/output voltage, current, and voltage difference).
Equipped with two heat sinks for better heat dissipation.
Can be used as a driver for high-power LED lights or a voltage regulator for solar panels.

Output Voltage/Current Adjustment

Adjust the “CV-ADJ” potentiometer clockwise to reduce voltage and counterclockwise to increase voltage.
Before connecting to a load, turn the “CC-ADJ” potentiometer counterclockwise about 30 turns to minimize the output current.
Turn “CC-ADJ” clockwise to set the desired output current (clockwise to increase, counterclockwise to decrease).
For battery charging, connect the module to the battery only after it is fully discharged, as charging current decreases with remaining battery energy.