CD4047 Astable/Monostable Multivibrator IC DIP-14 Package
DIP-14 Package: The "DIP-14" designation indicates that the IC is packaged in a Dual Inline Package with 14 pins.
Pin Configuration: The CD4047 typically has 14 pins, including power supply pins (VDD and VSS), astable/monostable mode control (RS), external capacitor and resistor connections, and output pins.
Astable Mode: In astable mode, the CD4047 functions as an oscillator, generating a continuous square wave output. The frequency of the oscillation is determined by external resistors and capacitors.
Monostable Mode: In monostable mode, the CD4047 operates as a one-shot multivibrator, producing a single pulse in response to an external trigger.
External Components: The CD4047 requires external resistors and capacitors to set the operating frequency and pulse width, depending on the mode of operation.
CD4047 Astable/Monostable Multivibrator IC DIP-14 Package
Available:In Stock
- Product SKU: INTEG078
₹ 21
₹ 29
Need Volume Discounts? Deals are specially designed for you. Click here
Need Customization? Provide us more details Click here
Warehouse Details
Specification
Description
The CD4047 is a CMOS-based Astable/Monostable Multivibrator IC (Integrated Circuit) in a DIP-14 (Dual Inline Package with 14 pins) configuration.Here's some information about the CD4047:
Functionality: The CD4047 is a versatile IC that can operate in either an astable (free-running oscillator) or monostable (one-shot) multivibrator mode.DIP-14 Package: The "DIP-14" designation indicates that the IC is packaged in a Dual Inline Package with 14 pins.
Pin Configuration: The CD4047 typically has 14 pins, including power supply pins (VDD and VSS), astable/monostable mode control (RS), external capacitor and resistor connections, and output pins.
Astable Mode: In astable mode, the CD4047 functions as an oscillator, generating a continuous square wave output. The frequency of the oscillation is determined by external resistors and capacitors.
Monostable Mode: In monostable mode, the CD4047 operates as a one-shot multivibrator, producing a single pulse in response to an external trigger.
External Components: The CD4047 requires external resistors and capacitors to set the operating frequency and pulse width, depending on the mode of operation.
Applications:
The CD4047 is commonly used in applications such as waveform generators, frequency dividers, time delay circuits, and other projects requiring timing functions.Features
- Lower power consumption: special CMOS oscillator configuration
- Monostable (one-shot) or astable (free-running) operation
- True and complemented buffered outputs
- Only one external R and C required
- Buffered inputs
- 100% tested for quiescent current at 20 V
- Standardized, symmetrical output characteristics
- 5-V, 10-V, and 15-V parametric ratings
- Meets all requirements of JEDEC Tentative Standard No. 13B, "Standard Specifications for Description of 'B' Series CMOS Devices"
Monostable Multivibrator Features:
- Positive-or negative-edge trigger
- Output pulse width independent of trigger pulse duration
- Retriggerable option for pulse width expansion
- Internal power-on reset circuit
- Long pulse widths possible using small RC components by means of external counter provision
- Fast recovery time essentially independent of pulse width
- Pulse-width accuracy maintained at duty cycles approaching 100%
Astable Multivibrator Features:
- Free-running or gable operating modes
- 50% duty cycle
- Oscillator output available
- Good astable frequency stability:Frequency deviation:= ±2% + 0.03%/°C @ 100 kHz= ±0.5% +0.015%/°C @ 10 kHz (circuits "trimmed" to frequency VDD= 10 V ± 10%)
Applications
- Envelope detection
- Frequency multiplication
- Frequency division
- Frequency discriminators
- Timing circuits
- Time-delay applications
Physical Attributes
- Weight (gm) : 2
Documentation
Package Includes
- 1 x CD4047 Astable/Monostable Multivibrator IC DIP-14 Package