ICL8038 Monolithic Function Signal Generator Module DIY Kit Sine Square Triangle
Review: 5 - "A masterpiece of literature" by , written on May 4, 20020
Great
-14%
ICL8038 Monolithic Function Signal Generator Module DIY Kit Sine Square Triangle
ICL8038 Monolithic Function Signal Generator Module DIY Kit Sine Square Triangle
ICL8038 Monolithic Function Signal Generator Module DIY Kit Sine Square Triangle
ICL8038 Monolithic Function Signal Generator Module DIY Kit Sine Square Triangle

ICL8038 Monolithic Function Signal Generator Module DIY Kit Sine Square Triangle

Available:Out of Stock
  • Product SKU: KG612
Wishlist
₹ 509.80 ₹ 599
Successful pre-order.Thanks for contacting us!
Secure

Specification

Description

With excellent performance ASIC chip function generator ICL8038, add a small amount of resistive and capacitive components, can produce sine, triangle and square wave, and the frequency of the signal, duty cycle, adjustable distortion sine wave.

ICL8038 pin functions:

  1. foot, 12 foot: sine waveform adjusting terminal;
  2. foot: sine wave output;
  3. foot: triangle wave output;
  4. foot, 5 foot: the frequency and duty cycle (or waveform asymmetry) adjustment;
  5. foot: V +, the positive power supply;
  6. foot: offset; 8 foot: frequency adjustment input terminal;
  7. foot: square wave output.
    This is an open collector output terminal, work should take a load resistor to the corresponding positive power supply terminal from the pin, to get a TTL-compatible square-wave output, the load resistance must be connected to + 5V power supply;
  8. foot: timing capacitor terminal;
  9. foot: V-, negative power supply terminal or the ground. Use positive and negative power supply, 11 feet to the negative supply, the output waveform are symmetrical with respect to 0V; use a single positive power supply, 11 feet grounded, the output waveform is unipolar, uniform voltage is + VCC / 2;
  10. feet, 14 Feet: Empty foot.
The kits are designed for a frequency range is 50-5KHz, two bands with a switch S to switch, RP1 is the frequency adjustment, RP2 is the duty cycle adjustment, RP3 is a sine wave distortion adjustment. Circuit uses 12V single power supply, input from the X1; X2, X3 is a waveform output side, you can use oscilloscope to observe three output waveforms.


Technical Details

  • Model: ICL8038
  • Input 12V DC
  • Frequency range 50-5KHz,

Physical Attributes

  • L x W x H (mm): 60 x 45 x 2
  • Weight (gm) : 25

Product Video

Documentation

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)