L298N Dual H Bridge DC/Stepper Motor Driver Controller Module
![L298N Dual H-Bridge DC/Stepper Motor Driver/Controller Module]()
![L298N Dual H-Bridge DC/Stepper Motor Driver/Controller Module_front]()
![L298N Dual H-Bridge DC/Stepper Motor Driver/Controller Module_back]()
![L298N Dual H-Bridge DC/Stepper Motor Driver/Controller Module_f]()
![L298N Dual H-Bridge DC/Stepper Motor Driver/Controller Module]()
![L298N Dual H-Bridge DC/Stepper Motor Driver/Controller Module_front]()
![L298N Dual H-Bridge DC/Stepper Motor Driver/Controller Module_back]()
![L298N Dual H-Bridge DC/Stepper Motor Driver/Controller Module_f]()
DC Motor Control: The L298N can be used to control the speed and direction of two DC motors. It can drive motors with voltages of up to 35V and currents of up to 2A per channel, making it suitable for a wide range of DC motor applications.
Stepper Motor Control: In addition to DC motors, the module can also be used to control bipolar stepper motors. It provides the necessary circuitry for precise control over stepper motor movements, including step direction and step pulses.
Built-in Protection: The L298N often includes built-in protection features like thermal shutdown and overcurrent protection to prevent damage to the module or motors during operation.
Control Interface: It typically has pins for connecting to a microcontroller or other control devices to provide control signals for motor direction and speed. It can be controlled using PWM (Pulse Width Modulation) signals for speed control.
Heat Sink: Due to the potential for generating heat, many L298N modules come with a built-in heat sink or provide space for attaching an external one. Heat sinks help dissipate heat and keep the module cool during operation.
This motor driver for DC Motors and Stepper Motor is widely popular because it uses the famous L298N Dual H Bridge Driver Chip. This motor driver is optimized for maximum performance at a cost everyone can afford.
The L298N Dual H Bridge DC/Stepper Motor Driver Controller Module is for driving two robot motors. It uses the popular L298N Dual H-Bridge Motor Driver chip and is powerful enough to drive motors from 5-35 Volts at up to 2 Amps per channel. The flexible digital input controls allow each motor to be fully independent with complete control over speed direction and braking action.
This board provides a handy 5V regulator that can be used to power other circuitry such as your robot’s microcontroller. Its modular design is easily adapted to a wide variety of robot controllers including the popular Arduino family.
This L298N driver module adopts the original brand new L298N chip . It uses the SMT process and high-quality aluminum electrolytic capacitor to stabilize the circuit. The module can easily control the DC motor speed and direction, also control the 2 phase stepper motor.
-20%
L298N Dual H Bridge DC/Stepper Motor Driver Controller Module
Available:Out of Stock
- Product SKU: LGGE262
₹ 199
₹ 249
Specification
Description
The L298N is a popular dual H-bridge motor driver/controller module used to control both DC (direct current) motors and stepper motors.Here's some information about the L298N Module :
Dual H-Bridge: The "dual H-bridge" design means that this module can control two separate motors independently. Each H-bridge is a circuit that allows you to control the direction and speed of a motor.DC Motor Control: The L298N can be used to control the speed and direction of two DC motors. It can drive motors with voltages of up to 35V and currents of up to 2A per channel, making it suitable for a wide range of DC motor applications.
Stepper Motor Control: In addition to DC motors, the module can also be used to control bipolar stepper motors. It provides the necessary circuitry for precise control over stepper motor movements, including step direction and step pulses.
Built-in Protection: The L298N often includes built-in protection features like thermal shutdown and overcurrent protection to prevent damage to the module or motors during operation.
Control Interface: It typically has pins for connecting to a microcontroller or other control devices to provide control signals for motor direction and speed. It can be controlled using PWM (Pulse Width Modulation) signals for speed control.
Heat Sink: Due to the potential for generating heat, many L298N modules come with a built-in heat sink or provide space for attaching an external one. Heat sinks help dissipate heat and keep the module cool during operation.
Applications:
The L298N module is widely used in robotics, automation, and various projects where motor control is required. Its versatility and ability to control both DC and stepper motors make it a popular choice among hobbyists and engineers for a wide range of applications.This motor driver for DC Motors and Stepper Motor is widely popular because it uses the famous L298N Dual H Bridge Driver Chip. This motor driver is optimized for maximum performance at a cost everyone can afford.
The L298N Dual H Bridge DC/Stepper Motor Driver Controller Module is for driving two robot motors. It uses the popular L298N Dual H-Bridge Motor Driver chip and is powerful enough to drive motors from 5-35 Volts at up to 2 Amps per channel. The flexible digital input controls allow each motor to be fully independent with complete control over speed direction and braking action.
This board provides a handy 5V regulator that can be used to power other circuitry such as your robot’s microcontroller. Its modular design is easily adapted to a wide variety of robot controllers including the popular Arduino family.
This L298N driver module adopts the original brand new L298N chip . It uses the SMT process and high-quality aluminum electrolytic capacitor to stabilize the circuit. The module can easily control the DC motor speed and direction, also control the 2 phase stepper motor.
Technical Details
- Driver IC : L298N
- Input Supply Voltage (VDC) : 5 ~ 35
- Supply Current (A) : 2 (peak per channel)
- Logic Voltage (V) : 4.5 to 5.5
- Logic Current (mA) : 0 to 36
- Control signal input voltage (V) : 4.5 to 5.5
- Maximum Power (W) : 20
- Operating Temperature (°C) : -25 to 130
Features
- Popular L298N Dual H-Bridge Motor Driver chip
- Drivers motors from 5-35V at up to 2A per channel
- Provides 4 LEDs that reflect the state of the control logic
- Independent direction, speed, and braking for each motor
- Screw terminals for easy connections to motors and power
- Includes a heavy-duty heat sink for maximum performance
- Easy to interface with most robot controllers
- Supports current sensing
- Handy power LED
Physical Attributes
- L x W x H (mm): 55 x 60 x 30
- Weight (gm) : 35
Documentation
Package Includes
- 1 x L298N Dual H Bridge DC Stepper Motor Driver Controller Module
Related items
₹ 109.00
₹ 149.00
₹ 113.00
₹ 181.00
₹ 159.00
₹ 199.00
₹ 99.00
₹ 139.00
₹ 49.00
₹ 99.00
