Mega2560 Pro ATMEGA2560-16AU Micro USB CH340G Development Board Without USB Cable
- Product SKU: KGPDB006
Need Volume Discounts? Deals are specially designed for you. Click here
Need Customization? Provide us scrmore details Click here
- Order within
DescriptionThe "Mega2560 Pro ATMEGA2560-16AU Micro USB CH340G Development Board" is a compact development board based on the ATmega2560 microcontroller.
Here's an overview of its key features and components:ATmega2560-16AU Microcontroller: The ATmega2560-16AU is a powerful 8-bit microcontroller from Atmel. It is part of the AVR family and runs at 16 MHz. This chip is the core of the development board and offers 256 KB of flash memory, 8 KB of SRAM, and 4 KB of EEPROM. It is widely used in the Arduino Mega series and can be programmed using the Arduino IDE.
Micro USB Port: The board is equipped with a micro USB port, which serves a dual purpose. It can be used for both power supply and serial communication with a computer. The inclusion of a micro USB port makes it easy to connect the board to a computer for programming and data exchange.
CH340G USB-to-Serial Converter: The CH340G is a USB-to-serial converter chip. It enables the board to communicate with a computer over USB. To use this chip, you may need to install drivers on your computer, depending on your operating system.
Compact Form Factor: The "Pro" in its name signifies that this board is designed to be compact and streamlined compared to traditional Arduino Mega boards. It may not include as many I/O pins or additional features found on larger Mega boards, making it more suitable for space-constrained projects.
GPIO Pins: The board provides a set of GPIO pins for connecting external components such as sensors, actuators, and displays. These pins are compatible with the Arduino Mega, which means you can use existing Arduino libraries and code.
Programming:You can program the ATmega2560 microcontroller on this board using the Arduino IDE. The board is typically supported through the Arduino Mega board package, allowing you to write and upload Arduino sketches to control the microcontroller's behavior.
Power Supply: The board can be powered via the micro USB port or through an external power source connected to the voltage regulator on the board. It's essential to provide the correct voltage (usually 5V) to power the board.
- Microcontroller: ATmega2560
- Operating Voltage: 5V DC
- Input Voltage (recommended):6 to 9V DC
- Input Voltage (limit):12V DC
- Digital I/O Pins: 54 (of which 15 provide PWM output)
- Analog Input Pins:16
- DC Current for 5V Pin:800 mA
- DC Current for 3.3V Pin: 800 mA
- Flash Memory:256 KB of which 8 KB is used by the bootloader
- EEPROM:4 KB
- Clock Speed: 16 MHz
- Built-in LED:13
- USB type: Micro USB
- USB Cable: Micro USB(USB Not included in this board)
- Length (mm):54
- Width (mm):40
- Height (mm):18
- Weight (gm):15