RGB LED Ring WS2812 5050 RGB LED + Integrated Driver Module
RGB LED Ring WS2812 5050 RGB LED + Integrated Driver Module
Available:In Stock
- Product SKU: KG532
₹ 350
₹ 399
Need Volume Discounts? Deals are specially designed for you. Click here
Need Customization? Provide us more details Click here
Warehouse Details

- Order within

Specification
Description
WS2812 5050 RGB 12/16-LED Round Lamp Development Board - Black Round and round and round they go! 12 ultra bright smart LED NeoPixels are arranged in a circle with 1.5" (37mm) outer diameter. The rings are "chainable" - connect the output pin of one to the input pin of another. Use only one microcontroller pin to control as many as you can chain together. Each LED is addressable as the driver chip is inside the LED.Features
12-BIT
16-BIT
- Chip: WS2812 (built-in LED)
- LED: 5050 RGB full color highlight package
- Voltage: 5V
- Port: Digital
- Platform: for Arduino and Raspberry Pi microcontroller
- 5050 highlight LED, built-in control chip, only an IO port to control multiple LED
- Chip built shaping circuit, signal distortion is not cumulative, stable display
- Adjust brightness tricolor 256, 160,000-color TFT display, scanning frequency of not less than 400Hz / S
- Serial even level interface, via a signal line to complete the reception and decoding of data
- Refresh rate of 30 frames / sec, even low-level mode even series of not less than 512 points
- Send and receive data at speeds up to 800Kbps
- Highlight LED, light color high brightness consistency
- Both ends even level interface, can be connected directly
16-BIT
- The control circuit and the LED share the only power source.
- Control circuit and RGB chip are integrated into a package of 5050 components, forming a complete control of pixel point.
- Built-in signal reshaping circuit, after wave reshaping to the next driver, ensure wave-form distortion does not accumulate.
- Built-in electric reset circuit and power lost reset circuit.
- Each pixel of the three primary colors can achieve 256 brightness levels, or 16M colors full-color display, and scan frequency not less than 400Hz/s.
- Cascading port transmission signal by a single line.
- Any two points the distance more than 5m transmission signal without any increase circuit.
- When the refresh rate is 30fps, the cascade number is not less than 1024 points.
- Send data at speeds of 800Kbps.
- The color of the light was highly consistent
- Full-color module, Full-color soft lights a lamp strip.
- LED decorative lighting, Indoor/outdoor LED video irregular screen.
Integration with Arduino
