PCF8591 Module Analog to Digital / Digital-Analog Converter Module Jumper Wire
![PCF8591 AD/DA Converter Module Analog To Digital Conversion + 4pin F-F Cab. (Large Board)]()
![PCF8591 AD/DA Converter Module Analog To Digital Conversion + 4pin F-F Cab. (Large Board)]()
![PCF8591 AD/DA Converter Module Analog To Digital Conversion + 4pin F-F Cab. (Large Board)]()
![PCF8591 AD/DA Converter Module Analog To Digital Conversion + 4pin F-F Cab. (Large Board)]()
![PCF8591 AD/DA Converter Module Analog To Digital Conversion + 4pin F-F Cab. (Large Board)]()
![PCF8591 AD/DA Converter Module Analog To Digital Conversion + 4pin F-F Cab. (Large Board)]()
![PCF8591 AD/DA Converter Module Analog To Digital Conversion + 4pin F-F Cab. (Large Board)]()
![PCF8591 AD/DA Converter Module Analog To Digital Conversion + 4pin F-F Cab. (Large Board)]()
![PCF8591 AD/DA Converter Module Analog To Digital Conversion + 4pin F-F Cab. (Large Board)]()
![PCF8591 AD/DA Converter Module Analog To Digital Conversion + 4pin F-F Cab. (Large Board)]()
![PCF8591 AD/DA Converter Module Analog To Digital Conversion + 4pin F-F Cab. (Large Board)]()
![PCF8591 AD/DA Converter Module Analog To Digital Conversion + 4pin F-F Cab. (Large Board)]()
The functions of the device include analog input multiplexing, on-chip track and hold function, 8-bit analog‑to‑digital conversion, and an 8‑bit digital‑to‑analog conversion. The maximum conversion rate is given by the maximum speed of the I²C-bus.
-6%
PCF8591 Module Analog to Digital / Digital-Analog Converter Module Jumper Wire
Available:In Stock
- Product SKU: KG191V01
₹ 139
₹ 149
Need Volume Discounts? Deals are specially designed for you. Click here
Need Customization? Provide us more details Click here
🏠
Warehouse Details:
Specification
Description
PCF8591 Module Analog to Digital / Digital-Analog Converter Module Jumper Wire
This is a breakout board/Prototype Board for PCF8591 IC. The PCF8591 is a single-chip, single‑supply low‑power 8‑bit CMOS data acquisition device with four analog inputs, one analog output, and a serial I²C‑bus interface. Three address pins A0, A1, and A2 are used for programming the hardware address, allowing the use of up to eight devices connected to the I²C‑bus without additional hardware. Address, control, and data to and from the device are transferred serially via the two-line bidirectional I²C‑bus.The functions of the device include analog input multiplexing, on-chip track and hold function, 8-bit analog‑to‑digital conversion, and an 8‑bit digital‑to‑analog conversion. The maximum conversion rate is given by the maximum speed of the I²C-bus.
Technical Details
- Operating Voltage (VDC): 2.5 to 6
- IC Chip: PCF8951
- PCB Size (L x W) mm: 35 x 23
PCF8591 IC Features
- The Left
- Single power supply
- Operating voltage: 2.5V-6V
- Low standby current
- Serial input/output via I2C bus
- 3 hardware address pins
- Sampling rate determined by I2C bus speed
- 4 analog inputs: single-ended or differential
- Automatic incremental channel selection
- Analog voltage range: VSS to VDD
- Built-in track-and-hold circuit
- 8-bit successive approximation A/D converter
- 1 analog output with DAC gain
Module Features
- Supports external 4-way voltage input (0-5V range)
- Integrated photoresistor for ambient light intensity measurement
- Integrated thermistor for precise ambient temperature measurement
- 1 channel 0-5V voltage input with adjustable potentiometer
- Power indicator for module status
- DA output indicator lights up based on output voltage
- PCB size: 3.6cm × 2.3cm
- 1.6mm thick double-layer PCB with 3mm mounting holes
Left Pin
- AOUT: Chip DA output interface
- AIN0: Chip analog input interface 0
- AIN1: Chip analog input interface 1
- AIN2: Chip analog input interface 2
- AIN3: Chip analog input interface 3
Right Pin Pin
- SCL – I2C clock interface (connect to microcontroller IO port)
- SDA – I2C data interface (connect to microcontroller IO port)
- GND – Connect to ground
- VCC – Connect to 3.3V-5V
Four red jumper-cap instruction
- P4 – Connect to P4 shorting cap to select thermistor access circuit
- P5 – Connect to P5 shorting cap to select photoresistor access circuit
- P6 – Connect to P6 shorting cap to select 0-5V adjustable voltage access circuit
Applications :
- Sensor Data Collection: Reads analog signals from sensors like temperature sensors, light sensors, and pressure sensors, converting them into digital signals for microcontroller processing.
- Signal Conversion: Converts digital signals back into analog signals for use in devices like actuators, motors, or other analog-controlled systems.
- Automation Systems: Used in industrial automation to interface analog input devices with microcontrollers via I2C communication.
- Data Acquisition Systems: Helps in acquiring and digitizing multiple analog signals in embedded system applications.
Physical Attributes
- LxW (mm): 35x23mm
- Weight (gm) : 5
Package Includes
- 1 x PCF8591 Module Analog to Digital / Digital-Analog Converter Module Jumper Wire
Related items
₹ 38.00
₹ 49.00
₹ 141.00
₹ 149.00
₹ 99.00
₹ 139.00
