Eye blink detector for accident prevention

Description

This kit involves measuring and controlling the eye blink using the IR sensor. The IR transmitter is used to transmit the infrared rays in our eyes. The IR receiver is used to receive the reflected infrared rays of the eye. If the eye is closed means the output of the IR receiver is high otherwise the IR receiver output is low. This is to know the eye is in a closing or opening position.

This Eye blink detector output is given to the logic circuit to indicate the alarm. This project involves controlling accidents due to the unconscious through Eye blink. Here one eye blink sensor is there (IR) where if anybody loses consciousness and indicates through the alarm. There is an IR-based sensing unit that consists of a transmitter and receiver. The transmitter the IR rays and if the eyes are open the rays will be reflected and a very high amount will be reflected back to the receiver else if closed comparatively lesser.

This Eye blink detector accident prevention variation can be converted to voltage using a proper interface. The controller can sense the voltage difference and define the condition that if the eyes are open the vehicle will move and the alarm will not blow else the alarm will be activated and the vehicle stops slowly automatically.