Energy Monitoring and Control System
- Product SKU: LGEC120
- Order within
DescriptionThe energy meter is an electrical measuring device, which is used to record Electrical Energy Consumed over a specified period of time in terms of units. Here we have an energy meter using the current sensing concept. This energy meter is prepaid that is recharged and used. The recharge can be done by sending a simple SMS from your mobile phone. There Energy Monitoring and Control System is a recharge tag to be sent by the mobile which will act as the recharge code as a prototype.
The Energy Monitoring and Control System will check for consumption on the basis of load and the recharge available. The power will be available till the recharge amount does not end. There is a feature that if there is any interruption with the meter an SMS will be sent to the user for control.
The Energy Monitoring and Control System Project basically depends upon the energy units we use. In this project, the power supply is cut-off after a particular unit. The operator sitting at a remote station can recharge the system using SMS. Here the microcontroller keeps on sensing the load also. As the load increases, it will turn off the relay, and hence the power will be cut. As soon as the load gets decreased, the controller can turn on the relay also. If there is any type of violation in the meter an SMS will be sent to the registered user.
- Dimensions (cm) L x W x H : 28 x 24 x 8
- Weight (gm): 1000
Total Solution for Electronics,Electrical and Mechanical Projects
Superb kit. Great value.. Not a single component or wire was missing. Fantastic instructions. Completed kit works great. Provided code is a great starting point.
Great value for the money
I have bought ready to use project For this project. And the project is very good.