Load based traffic monitoring system
- Product SKU: LGEC175
- Order within
DescriptionIn this kit load based traffic monitoring system there are several switches connected to the microcontroller so depending upon the load on traffic switches will enable which will drive the relay. In relay there are 2 lights attached to it Green and Red. So, depending upon the load on traffic that bulb will glow on priority basis and if the load on traffic in different places will equal then this bulb will be blow at particular interval. It can be operated in normal mode in which the switching will be on the timing basis rather than priority basis.
In the kit load based traffic monitoring system the microswitches are momentary switches, which become continuous as long as they are kept pressed. Hence, as the load on switches increases, more and more number of switches gets pressed. By reading the number of switches pressed, the microcontroller can determine the traffic load. There are lights of two colors red and green on each side of the traffic. These are controlled by relay. To drive the relays, relay driver is there. Led indicators are there to shown the current status. A selector is there by which the system can be switched between automatic and priority mode.
- Dimensions (cm) L x W x H : 28 x 24 x 8
- Weight (gm): 1000
Thank you for a great product at a great value, 5/5, would buy again, I've already recommended it to all my friends.
Everything is a decent enough quality to learn on.
Within 10 minutes I was playing the A Team theme song to celebrate my achievements and was prepared to start an engineering firm.
This project is very advanced project. The demo model of this project kit feeling real.
This is product very good and excellent... And they have given explanation and circuit daigrams in A4 Xeroxs paper... It is very helpful ... And it is best site for projects