SMS controlled railway crossing
- Product SKU: LGEC107
- Order within
DescriptionIn the kit SMS-controlled railway crossing the idea is to design such a system through which the railway crossing is close and open by sending an SMS from the station master or drive of the train. The mobile sets are now a day’s used most widely and very commonly. The SMS can be sent to any mobile user of any service provider with no or a minimum charge.
The SMS-controlled railway crossing system is designed using a GSM modem. The GSM modem is configured as a receiver (for gate control). The SMS sent by the user is written in a particular format to open the gate. The controller receives the message and decodes it and identifies the task to be done.
In the kit SMS controlled railway crossing, any data sent via mobile phone will be delivered to the GSM modem connected with the microcontroller via the GSM network. The microcontroller reads the data from the GSM modem and processes it. If the format of the message is found to be correct, then it takes the proper action as per the instructions given by the user. Before closing the gate, it turns on a buzzer for alert and after some predefined time only it closes the gate. The system can be further upgraded and can be made automatic using different sensors.
- Dimensions (cm) L x W x H : 28 x 24 x 8
- Weight (gm): 1000
Superb kit. Great value.. Not a single component or wire was missing. Fantastic instructions. Completed kit works great. Provided code is a great starting point.
Great value for the money
I have bought ready to use project For this project. And the project is very good.